銅、鉛、鋅和鎳精礦機械取樣系統檢驗指南

Copper, lead, zinc and nickel concentrates — Guidelines for the inspection of mechanical sampling systems

核工業用試驗方法標準中精度和偏差說明的制備和解釋的標準指南

Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry

D19水委員會適用試驗方法的精度和偏差測定的標準實施規程

Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water

D22委員會測定精確度和偏差方法的標準指南

Standard Guide for Determination of Precision and Bias of Methods of Committee D22

廢物和污染介質管理用代表性取樣的標準指南

Standard Guide for Representative Sampling for Management of Waste and Contaminated Media

應用統計質量保證和控制圖表技術評估分析測量系統性能的標準實踐

Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

石油產品、液體燃料和潤滑劑試驗方法用精密度和偏差數據測定的標準實施規程

Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants

石油產品、液體燃料和潤滑劑試驗方法用精度和偏差數據測定的標準實施規程

Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants

石油產品、液體燃料和潤滑劑測試方法中使用的精度和偏差數據測定的標準實施規程

Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants

機械煤抽樣系統的偏移測試用標準實施規程

Standard Practice for Bias Testing a Mechanical Coal Sampling System

在ASTM測試方法中使用術語精度和偏差的標準實踐

Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods

用雙曝光法測量透明零件的光學畸變和偏差的標準實施規程

Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method

水質 水監測設備的性能要求和合格測試程序 水和廢水自動采樣裝置（采樣器）

Water quality. Performance requirements and conformity test procedures for water monitoring equipment. Automatic sampling devices (samplers) for water and waste water

彈性地板覆蓋物 - 片材寬度、長度、直線度和平整度的測定

Resilient floor coverings — Determination of width, length, straightness and flatness ofsheet material

氣體分析——分析偏差的調查和處理

Gas analysis — Investigation and treatment of analytical bias

水質 采樣 環境水采樣和處理的質量保證和質量控制指南

Water quality. Sampling. Guidance on quality assurance and quality control of environmental water sampling and handling

測量方法和結果的準確度（正確度和精密度） 確定標準測量方法正確度的基本方法

Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method

信息技術 人工智能 分類和回歸機器學習任務中不必要的偏差的處理 (ISO/IEC TS 12791:2024)

Information technology – Artificial intelligence – Treatment of unwanted bias in classification and regression machine learning tasks (ISO/IEC TS 12791:2024)

信息技術 人工智能 分類和回歸機器學習任務中不需要的偏差的處理（ISO/IEC TS 12791:2024）；德文版本 CEN/CLC ISO/IEC/TS 12791:2024

Information technology - Artificial intelligence - Treatment of unwanted bias in classification and regression machine learning tasks (ISO/IEC TS 12791:2024); German version CEN/CLC ISO/IEC/TS 12791:2024

包裝 軟管 測定翻蓋定位的試驗方法（草案）

Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap

食物鏈微生物學 方法驗證 第3部分：在單個實驗室中實施的參考和驗證替代方法驗證協議（ISO/DIS 16140-3:2017）

Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference and validated alternative methods implemented in a single laboratory (ISO/DIS 16140-3:2017); German and English version prEN ISO 16140-3:2017

機械振動 轉子平衡 第 14 部分：平衡誤差評估程序 (ISO 21940-14:2012 + Amd 1:2022)

Mechanical vibration - Rotor balancing - Part 14: Procedures for assessing balance errors (ISO 21940-14:2012 + Amd 1:2022)

機械振動 - 轉子平衡 - 第 14 部分：平衡誤差評估程序 (ISO 21940-14:2012 + Amd 1:2022)

Mechanical vibration - Rotor balancing - Part 14: Procedures for assessing balance errors (ISO 21940-14:2012 + Amd 1:2022)

機床檢驗通則 第4部分:數控機床的圓檢驗

Test code for machine tools.Part 4:Circular tests for numerically controlled machine tools

散裝礦產品取樣、制樣通則 偏差、精密度校核試驗方法

General rules for the sampling and sample preparation of minerals in bulk-Experimental methods for checking the precision and bias

船用外部單扇門門框通孔

Shipbuilding.Clear openings through frames for external single.Leaf doors

切削工具數據表示和交換.第1部分:基本原則和一般信息模式的概括.技術勘誤1

Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model; Technical Corrigendum 1

船舶和海洋技術.窗戶和舷窗用熱鋼化安全玻璃

Ships and marine technology - Thermally toughened safety glass panes for windows and side scuttles

機床. 測試臥式鏜床和銑床準確度的試驗條件. 第2部分: 車身可沿X軸移動的機床(落地式)

Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 2: Machines with movable column along the X-axis (floor type)

測量方法和結果的準確度（準確度和精密度） 第 1 部分：一般原則和定義

Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions

測量方法和結果的準確性（準確性和精確性） - 第4部分:確定標準測量方法準確性的基本方法

Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method

天然氣.用氣相色譜法測定成分和相關不確定度.第3部分：精密度和偏差

Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 3: Precision and bias

ISO通用公制螺紋-公差-第3部分：結構螺紋的偏差；技術勘誤表1

ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads; Technical Corrigendum 1

信息技術.人工智能（AI）.人工智能系統和人工智能輔助決策中的偏差

Information technology - Artificial intelligence (AI) - Bias in AI systems and AI aided decision making

ISO通用米制螺紋.公差.第3部分:結構螺紋的偏離

ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads

測量方法和測量結果的精確性.第4部分:標準測量方法真實性測定的基本方法

Accuracy (trueness and precision) of measurement methods and results -- Part 4: Basic methods for the determination of the trueness of a standard measurement method

水質 水監測設備的性能要求和一致性測試程序 水和廢水自動采樣裝置（采樣器）

Water quality - Performance requirements and compliance test procedures for water monitoring equipment - Automatic sampling devices (samplers) for water and wastewater

水質 水監測設備的性能要求和一致性測試程序 水和廢水的自動采樣裝置（采樣器）

Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automatic sampling devices (samplers) for water and waste water

信息處理技術 — 人工智能 — 分類和回歸機器學習任務中非期望偏差的處理

Information technology — Artificial intelligence — Treatment of unwanted bias in classification and regression machine learning tasks

信息技術 人工智能 分類和回歸機器學習任務中不必要偏差的處理

Information technology - Artificial intelligence - Treatment of unwanted bias in classification and regression machine learning tasks (ISO/IEC TS 12791:2024, IDT)

天然氣 通過氣相色譜法測定成分和相關不確定度 第3部分：精度和偏差

Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 3: Precision and bias (ISO 6974-3:2018)