含鐵素體和奧氏體不銹鋼鑄件鐵素體含量的估算

Standard Practice for Estimating Ferrite Content of Stainless Steel Castings Containing Both Ferrite and Austenite

獲得用于分析的顆粒形式的銅和銅合金的代表性樣品的標準指南

Standard Guide for Obtaining a Representative Sample of Copper and Copper Alloy in Particulate Form for Analysis

鎳鉻鉬鈮合金和鎳鉻鉬硅合金管材標準規范

Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloys and Nickel-Chromium-Molybdenum-Silicon Alloy Pipe and Tube

火法鑄造銅

Fire casting copper

一般用途耐腐蝕鋯基鑄件標準規范

Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application

鎳 鎳合金和鈷合金化學檢查分析限制的一般要求標準規范

Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys

成分分析用鋁錠、鋼坯、鑄件和成品或半成品鍛造鋁制品取樣的標準規程

Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis

用火花原子發射光譜法分析奧氏體不銹鋼的標準試驗方法

Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry

電感耦合等離子體原子發射光譜法分析鋅-5%鋁混合稀土合金的標準試驗方法

Standard Test Method for Analysis of Zinc-5?% Aluminum-Mischmetal Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry

電感耦合等離子體原子發射光譜法分析鋅-5%鋁混合稀土合金的標準試驗方法

Standard Test Method for Analysis of Zinc-5?% Aluminum-Mischmetal Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry

用于測定化學成分的取樣鋼和鐵的標準實施規程

Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition

通過電感耦合等離子體質譜法分析鎳合金的標準測試方法（基于性能）

Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)

火花原子發射光譜法分析鎳合金的標準試驗方法

Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry

用于測定化學成分的鐵合金和鋼鐵添加劑的標準實踐

Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition

用于測定化學成分的可鍛有色金屬和合金取樣的標準實施規程

Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

冷鐓和冷擠壓用鋼棒、棒材和線材 冷加工后不進行熱處理的鋼的交貨技術條件

Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for steels not intended for heat treatment after cold working

纖維玻璃化學分析方法

Chemical analysis methods of glass,glass marble and vitreous fiber

變形鋁及鋁合金化學成分分析取樣方法

Methods for sampling for analyzing the chemical composition of wrought aluminum and aluminum alloys

熱噴涂 粉末 成份和供貨技術條件

Thermal spraying-Powders-Composition and technical supply conditions

鋼表面鋅基和(或)鋁基鍍層單位面積鍍層質量和化學成分測定.重量法、電感耦合等離子體原子發射光譜法和火焰原子吸收光譜法

Zinc and/or aluminium based coatings on steel.Determination of coating mass per unit area and chemical composition.Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry

氧化釓

Gadolinium oxide

承壓用復合無縫鋼管

Composite seamless steel tubes for pressure

冶金材料化學成分分析測量不確定度評定

Evaluation of uncertainty in chemical composition analysis for metallurgical materials

變形鋁及鋁合金廢料分類、回收與利用 第1部分：廢料的分類

Classification and recycling and utilization of wrought aluminium and aluminium alloy scraps—Part 1：Classification of scraps

等離子旋轉電極霧化制粉用高溫合金棒料

Superalloy rods for powders atomized by plasma rotating electrode process

大型鍛鋼件用真空鋼錠的冶煉與鑄錠規范

Specification of smelting and casting of vacuum ingot for heavy steel forgings

保證淬透性結構鋼

Structural steels subject to end-quench hardenability requirements

氧化鐠

Praseodymium oxide

環境試驗用相對濕度查算表

Relative humidity tables for environmental test

深沖用優質碳素鋼規范

Specification for high-quality carbon steel for deep drawing

整體(粗制)耐火材料產品.第3部分:原樣表征

Monolithic (unshaped) refractory products - Part 3: Characterization as received

彈簧鋼絲.第3部分:油淬火和回火鋼絲 技術勘誤表1

Steel wire for mechanical springs — Part 3: Oil-hardened and tempered wire

鋼鐵.可用分析方法的評述

Steel and iron — Review of available methods of analysis

長石化學分析方法

Methods of chemical analysis for feldspar

機械用途合金鋼管

Alloy steel tubes for machine purposes

鎂合金焊絲 3.2 稀土 2.5Zn 0.72Zr (EZ33A)

Magnesium Alloy Welding Wire, 3.2 Rare Earths - 2.5Zn - 0.72Zr (EZ33A)

鎂和鎂合金 鎂合金錠和鑄件

Magnesium and magnesium alloys - Magnesium alloy ingots and castings