小型船舶 第 1 部分：動力船的一般要求

Small craft, Part 1: General requirements for power boats

工業卡車 穩定性驗證 第 10 部分：在由動力裝置橫向移動負載的堆垛特殊條件下運行的卡車的附加穩定性測試（ISO 22915-10:2008 MOD）

Industrial trucks — Verification of stability, Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices (ISO 22915-10:2008, MOD)

工業卡車 穩定性驗證 第 1 部分：概述

Industrial trucks — Verification of stability, Part 1: General

測定固體、半固體或液體廢料的穩定性和混溶性的標準實施規程

Standard Practice for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material

手動變速器和終傳動軸用潤滑油熱穩定性和氧化穩定性評估的標準試驗方法

Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

中間餾分燃料高溫穩定性的標準試驗方法

Standard Test Method for High Temperature Stability of Middle Distillate Fuels

測定含瀝青質殘留物、重質燃料油和原油內在穩定性的標準試驗方法（n-庚烷相分離；光學檢測）

Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detectio

襯墊材料對水分線性尺寸穩定性的標準試驗方法

Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture

可移動足球球門安全使用指南

Guide for Safer Use of Movable Soccer Goals

飛機操縱特性標準規范

Standard Specification for Aircraft Handling Characteristics

瀝青和瀝青粘合劑.瀝青的染色趨勢的測定

Bitumen and bituminous binders - Determination of staining tendency of bitumen

辦公家具.辦公椅.安全性要求

Office furniture - Office work chair - Safety requirements

土方工程 施工程序

Earthworks - Construction procedures

航空航天系列 電纜、電氣、飛機使用 測試方法 裝配穩定性

Aerospace series. Cables, electrical, aircraft use. Test methods - Stabilization of assembly

打樁設備安全要求

Piling equipment — Safety requirements

油漆和清漆 電鍍涂層 詞匯

Paints and varnishes. Electro-deposition coatings - Vocabulary

用于水上和水中的漂浮休閑用品 分類、材料、一般要求和試驗方法

Floating leisure articles for use on and in the water. Classification, materials, general requirements and test methods

氣體分析 校準氣體混合物的制備 I 類混合物的重量分析法

Gas analysis. Preparation of calibration gas mixtures. Gravimetric method for Class I mixtures

紙 一般圖形應用的穩定性要求

Paper. Requirements for stability for general graphic applications

工業卡車 穩定性驗證 操作員位置提升超過 1200mm 的訂單揀選卡車

Industrial trucks. Verification of stability. Order-picking trucks with operator position elevating above 1 200 mm

工業卡車 穩定性驗證 單側裝載卡車

Industrial trucks. Verification of stability - Single-side-loading trucks

標準物質 均勻性和穩定性的表征和評估方法

Reference materials. Approaches for characterization and assessment of homogeneity and stability

納米技術 用于體外試驗的納米物體工作懸浮液的特性 用于評估納米物體固有毒性（ISO 19337:2023）

Nanotechnologies – Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity (ISO 19337:2023)

侵蝕溝分級與分類

Grading and classification of erosion gullies

家具 電動家具 穩定性、強度、耐用性和機械安全要求

Furniture - Electrically operated furniture - Stability, strength, durability and mechanical safety requirements; German and English version prEN 17684:2022 / Note: Date of issue 2022-06-03

航空航天系列 飛機用電氣電纜 試驗方法 第707部分：裝配的穩定性

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 707: Stabilization of assembly; German and English version EN 3475-707:2017

納米技術 用于體外試驗評估納米物體固有毒性的納米物體工作懸浮液的特性（ISO 19337:2023）

Nanotechnologies - Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity (ISO 19337:2023)

草案 納米技術 用于評估納米物體固有毒性的體外試驗的納米物體工作懸浮液特性 (ISO 19337:2023)

Draft Document - Nanotechnologies - Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity (ISO 19337:2023); German and English version prEN ISO 19337:2024

納米技術 用于評估納米物體固有毒性的體外試驗的納米物體工作懸浮液的特性（ISO 19337:2023）

Nanotechnologies - Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity (ISO 19337:2023)

水上和水中使用的漂浮休閑用品 第3部分：A 類設備的附加具體安全要求和測試方法

Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices (ISO/DIS 25649-3:2021); German and English version prEN ISO 25649-3:2021 / Note: Date of issue 2021-10-22*Inten...

電力系統安全穩定導則

Code on security and stability for power system

食品安全國家標準 化學分析方法驗證通則

General rules for validation of national food safety standards chemical analysis methods

植物品種特異性(可區別性)、一致性和穩定性測試指南 辣椒

Guidelines for the conduct of tests for distinctness, uniformity and stability—Capsicum(Capsicum annuum L.)

植物品種特異性、一致性和穩定性測試指南 豌豆

Guidelines for the conduct of tests for distinctness, uniformity and stability－Pea(Pisum sativum L.)

植物品種特異性、一致性和穩定性測試指南 玉米

Guidelines for the conduct of tests for distinctness, uniformity and stability—Maize（Zea mays L.）

植物品種特異性、一致性和穩定性測試指南 大豆

Guidelines for the conduct of tests for distinctness,uniformity and stability.Soybean(Glycine max (L.) Merrill)

植物品種特異性(可區別性)、一致性和穩定性測試指南 水稻

Guidelines for the conduct of tests for distinctness, uniformity and stability—Rice (Oryza sativa L.)

植物品種特異性、一致性和穩定性測試指南 芥菜

Guidelines for the conduct of tests fordistinctness, uniformity and stability－Mustard(Brassica juncea(L.)Czern.et Coss)

體外診斷醫療器械 生物源性樣品中量的測量 有證參考物質及支持文件內容的要求

In vitro diagnostic medical devices—Measurement of quantities in samples of biological origin—Requirements for certified reference materials and the content of supporting documentation

塔式起重機.穩定性要求

Tower cranes. Stability requirements

土方機械 安全 第4部分：挖掘裝載機的要求

Earth-moving machinery—Safety—Part 4: Requirements for backhoe loaders

植物新品種特異性、一致性、穩定性測試指南.山茶屬

Guidelines for the conduct of tests for distinctness, uniformity and stability.Camellia (Camellia L.)

工業車輛 穩定性驗證 第7部分：兩向和多向運行叉車

Industrial trucks—Verification of stability—Part 7: Bidirectional and multidirectional trucks

除流動式、塔式和浮式起重機以外的起重機.穩定性基本要求

Cranes other than mobile,tower and floating cranes and tower cranes.General requirements for stability

感官分析 橄欖油品評杯使用要求

Sensory analysis—Service condition for the olive oil tasting glass

分散體系穩定性表征指導原則

Guidelines for the characterization of dispersion stability

工業車輛 操作手冊

Industrial Vehicle Operation Manual

鞍馬

Pommel horse

小艇 穩定性和浮性的評定與分類 第1部分:艇長長度不小于6米的非帆艇

Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m

納米技術.評估固有納米物體毒性的體外測定用納米物體工作懸浮液的特性

Nanotechnologies — Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity

固定式訓練設備第2部分:力量訓練設備附加特定安全要求和試驗方法

Stationary training equipment — Part 2: Strength training equipment — Additional specific safety requirements and test methods

流動式起重機 穩定性的確定 修改件1

Mobile cranes — Determination of stability

化妝品. 化妝品穩定性試驗指南

Cosmetics - Guidelines on the stability testing of cosmetic products

過氧化氫

Hydrogen peroxide

助行器具.助行架

Assistive products for walking -- Walking frames

植物新品種特異性、一致性、穩定性測試指南 櫟屬

Guide for testing specificity, consistency and stability of new plant varieties Quercus genus

植物新品種近似品種篩選指南

Guidelines for screening similar varieties of new plant varieties

納米技術 用于體外試驗的納米物體工作懸浮液的特性 以評估納米物體固有的毒性

Nanotechnologies - Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity

植物新品種特異性、一致性和穩定性測試指南 橡膠樹

Guidelines for the conduct of tests for distinctness, uniformity and stability.Rubber tree (Hevea brasiliensis Muell.-Arg.)

植物品種特異性（可區別性）、一致性和穩定性測試指南蛹蟲草

Guidelines for Plant Variety Specificity (Distinguishability), Consistency and Stability Testing Cordyceps militaris

植物品種特異性（可區別性）、一致性和穩定性測試指南糙皮側耳

Guidelines for testing plant variety specificity (distinguishability), consistency and stability Pleurotus truncatula

植物品種特異性（可區別性）、一致性和穩定性測試指南地涌金蓮屬

Guidelines for plant variety specificity (distinguishability), consistency and stability testing of Nasturtium genus

植物品種特異性（可區別性）、一致性和穩定性測試指南毛木耳

Plant variety specificity (distinguishability), consistency and stability testing guide for Auricularia tomentosa

植物品種特異性（可區別性）、一致性和穩定性測試指南黃麻

Guidelines for Plant Variety Specificity (Distinguishability), Consistency and Stability Testing Jute

石油產品 燃料（F 級） 鑒于 2020 年硫含量最高 0.50% 的實施 燃料供應商和用戶對船用燃料質量的考慮

Petroleum products. Fuels (class F). Considerations for fuel suppliers and users regarding marine fuel quality in view of the implementation of maximum 0,50 % sulfur in 2020

表面化學分析 納米結構材料的表征

Surface chemical analysis. Characterization of nanostructured materials

航空發動機供應鏈測量系統分析要求

AS13003? REV. A Measurement Systems Analysis Requirements for the Aero Engine Supply Chain

家具 座椅 穩定性的測定

Furniture - Seating - Determination of stability

家具 座椅 穩定性測定

Furniture - Seating - Determination of stability

家具 安全性、強度和耐久性 家用桌子的要求

Furniture - Safety, strength and durability - Requirements for domestic tables

瀝青混合料 試驗方法 第34部分：馬歇爾試驗

Bituminous mixtures - Test methods - Part 34: Marshall test

非家用儲藏家具 安全性、強度、耐久性和穩定性要求

Non-domestic storage furniture - Requirements for safety, strength, durability and stability

納米技術 用于體外試驗評估納米物體固有毒性的納米物體工作懸浮液的特性（ISO 19337:2024 IDT）

Nanotechnologies — Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity (ISO 19337:2024, IDT)

參考材料 同質性和穩定性的表征和評估方法（ISO 33405:2024 等同）

Reference materials — Approaches for characterization and assessment of homogeneity and stability (ISO 33405:2024, IDT)

分析儀器穩定性評價 第1部分：基于標準方法精密度的評價

Evaluation of stability for analytical instruments Part 1: Evaluation based on the precision of standard method

家具 座椅 穩定性測定

Furniture - Seating - Determination of stability

辦公家具-辦公椅-第2部分：安全要求

Office furniture - Office work chair - Part 2: Safety requirements

水上和水中使用的漂浮休閑用品 第3部分：A 類設備的附加具體安全要求和測試方法

Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices (ISO 25649-3:2017)

納米技術 用于體外試驗的納米物體工作懸浮液的特性 以評估納米物體固有的毒性

Nanotechnologies - Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity