NZS HB44:2001 人類和環境細分（SNZ HB 44:2001）

This amendment addresses Section 6 ? Aviation electrical installations, facilities and equipment. This section applies to aviation electrical

Subdivision for People and the Environment (SNZ HB 44:2001)

BS HB 10170:1999 手冊 HB 10170:1999

Handbook HB 10170:1999

BS HB 10169:1999 手冊 HB 10167:1999

Handbook HB 10167:1999

BS HB 10168:1999 手冊 HB 10168:1999

Handbook HB 10168:1999

BS HB 10167:1999 手冊 HB 10167:1999

Handbook HB 10167:1999

HB 2390-1977 HB 241-75、HB 242-70螺紋用搓絲板 d=2～6mm t=0.35～2mm

Thread rolling plate for HB 241-75, HB 242-70 thread d=2~6mm t=0.35~2mm

HB 6938-1994 二齒球頭立銑刀用偏背刀 用HB 6929-94 HB 6932-94.D=56～63mm

HB 6929-94 HB 6929-94 HB 6932-94.D=56~63mm

HB 6925-1994 三齒粗加工立銑刀用槽銑刀 用HB 6911～6912-94 HB 6914～6915-94.D=63～80mm

HB 6911~6912-94 HB 6914~6915-94.D=63~80mm for slot milling cutter for three-tooth rough machining end mill

HB 2386-1977 滾壓HB 241-75、HB 242-70 螺紋的滾絲輪用滾絲軸 d=36～45mm t=1.5～2mm

Thread rolling shaft for rolling HB 241-75, HB 242-70 thread rolling wheel d=36~45mm t=1.5~2mm

HB 6940-1994 四齒球頭立銑刀用槽銑刀 用HB 6930-94 HB 6933-94.D=45～80mm

HB 6930-94 HB 6933-94.D=45~80mm for slot milling cutter for four tooth ball end mill

HB 6942-1994 六齒球頭立銑刀用槽銑刀 用HB 6931-94 HB 6934-94.D=63～80mm

HB 6931-94 HB 6934-94.D=63~80mm for slot milling cutter for six tooth ball end mill

HB 257-1973 HB 241-70，HB 243-70螺紋底孔用光面塞規應用尺寸M1～M120、AG3～AG30

HB 241-70, HB 243-70 HB 243-70 threaded bottom hole with smooth plug gauge application size M1~M120, AG3~AG30

HB 6917-1994 四齒粗加工立銑刀用槽銑刀 用于HB 6904～6905-94 HB 6907～6908-94.D=40～63mm

Slot milling cutter for four-tooth roughing end mill for HB 6904~6905-94 HB 6907~6908-94.D=40~63mm

HB 6927-1994 三齒粗加工立銑刀用偏背刀 用HB 6911～6912-94 HB 6914～6915-94.D=75～80mm

HB 6911~6912-94 HB 6914~6915-94.D=75~80mm

HB 6923-1994 二齒粗加工立銑刀用偏背刀 用于HB 6910～94 HB 6913-94.D=56～63mm

Two-tooth rough machining end mill with back cutter for HB 6910~94 HB 6913-94.D=56~63mm