Gas phase adjustment method

Gas phase adjustment method, Total:411 items.

In the international standard classification, Gas phase adjustment method involves: Internal combustion engines for road vehicles, Fertilizers, Paper and board, Ventilators. Fans. Air-conditioners, Coals, Shipbuilding and marine structures in general, Valves, Test conditions and procedures in general, Fluid power systems, Tobacco, tobacco products and related equipment, Installations in buildings, Medical equipment, Analytical chemistry, Kitchen equipment, Ergonomics, Construction materials, Vocabularies, Technical product documentation, Electrical wires and cables, Refrigerating technology, Protection against excessive pressure, Measurement of fluid flow, Pesticides and other agrochemicals, Domestic electrical appliances in general, Geology. Meteorology. Hydrology, Environmental testing, Products of the textile industry, Welding, brazing and soldering, Electronic tubes, Petroleum, petroleum products and natural gas handling equipment, Pumps, Environmental protection, Protection against fire, Road vehicle systems, Paint ingredients, Compressors and pneumatic machines, On-board equipment and instruments, Cargo equipment, Heat pumps, Electrical accessories, Burners. Boilers, Domestic, commercial and industrial heating appliances, Air quality, Equipment for entertainment, Earth-moving machinery, Fluid storage devices, Domestic safety, Power transmission and distribution networks, Rubber and plastics products, Rubber, Raw materials for rubber and plastics, Energy and heat transfer engineering in general, Internal combustion engines, Electrical equipment for working in special conditions, Reinforced plastics, Railway rolling stock, Miscellaneous domestic and commercial equipment, Farm buildings, structures and installations, Aerospace electric equipment and systems.

Korean Agency for Technology and Standards (KATS), Gas phase adjustment method

KS R 1053-2007 Testing method for automobile air conditioners
KS R 1053-2013 Test methods for automobile air conditioners
KS F 2807-2001 Method of measurement of air quantity for ventilation and air conditioning system
KS B 6717-2004 Ice thermal storage units for air conditioning purpose－Test methods
KS C 9306-2011 Air conditioners
KS H ISO 15592-2:2013 Fine-cut tobacco and smoking articles made from it-Methods of sampling, conditioning and analysis-Part 2:Atmosphere for conditioning and testing
KS B 8213-2019 Pressure regulators and associated safety devices for gas appliances－Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
KS H ISO 15592-2-2023 Fine-cut tobacco and smoking articles made from it－Methods of sampling, conditioning and analysis－Part 2：Atmosphere for conditioning and testing
KS C IEC 60535-2002(2017) Jet fans and regulators
KS C IEC 60535-2022 Jet fans and regulators
KS B 6354-2016(2021) LP－GAS pressure regulators used in cutting,heating and related processes
KS B 8213-2009(2019) Pressure regulators and associated safety devices for gas appliances－Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
KS B ISO 6953-2-2013 Pneumatic fluid power－Compressed air pressure regulators and filter-regulators－Part 2：Test methods to determine the main characteristics to be included in literature from suppliers
KS B ISO 6953-2-2005(2010) Pneumatic fluid power－Compressed air pressure regulators and filter-regulators－Part 2：Test methods to determine the main characteristics to be included in literature from suppliers
KS B ISO 7292:2005 Flowmeter regulators used on cylinders for welding, cutting and allied processes-Classification and specifications
KS B ISO 7292:2015 Flowmeter regulators used on cylinders for welding, cutting and allied processes－Classification and specifications
KS B ISO 2503-1:2002 Gas welding equipment－Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar
KS B ISO 2503-1:2003 Gas welding equipment－Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar
KS B ISO 2503-2007(2017) Gas welding equipment－Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar
KS R 2056-2013 Expansion valves for automobile air conditioners
KS B ISO 7292-2005(2010) Flowmeter regulators used on cylinders for welding, cutting and allied processes－Classification and specifications
KS B 6213-2019 Liquefied petroleum gas regulators for domestic use
KS R 2056-2002 Expansion valves for automobile air conditioners
KS W 5092-2023 AC generators and associated regulators for aircraft

Standard Association of Australia （SAA）, Gas phase adjustment method

AS 4621:2019 Regulator for use with liquefied petroleum — Vapour phase
AS 4618:2019 Gas appliance regulators
AS 2913:2000 Evaporative air-conditioning equipment
AS 3840.1:1998 Pressure regulators for use with medical gases - Pressure regulators and pressure regulators with flow-metering devices

Society of Automotive Engineers (SAE), Gas phase adjustment method

SAE ARP5374B-2021 Method of Testing Pre-Conditioned Air Equipment
SAE AS1197-1993 CONTINUOUS FLOW OXYGEN REGULATOR
SAE AIR806B-1997 Air Conditioning of Aircraft Cargo
SAE AS1197A-2018 Continuous Flow Oxygen Regulator
SAE AS8027-2018 Crew Member Oxygen Regulators, Demand
SAE AS1197B-2019 Continuous Flow Oxygen Regulator
SAE AS463-2002 Oxygen Regulators for Commercial Transport Aircraft
SAE AS8027-1995 Crew Member Oxygen Regulators, Demand

Japanese Industrial Standards Committee (JISC), Gas phase adjustment method

JIS B 8615:1984 Testing methods for unitary air conditioners
JIS B 8372-3:2022 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
JIS C 9612:2013 Room air conditioners
JIS C 9612:1994 Room air conditioners
JIS C 9612:1999 Room air conditioners
JIS C 9612:2005 Room air conditioners
JIS B 8616:1993 Package air conditioners
JIS A 4412:1994 Air-conditioning unit for dwellings
JIS B 8372-2:2022 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
JIS B 8372-2:2003 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
JIS E 4015 AMD 1:2011 Measuring methods for air conditioning and heating temperature of railway rolling stock (Amendment 1)

SAE - SAE International, Gas phase adjustment method

SAE ARP5374B-2016 Method of Testing Pre-Conditioned Air Equipment
SAE ARP5374-2001 Method of Testing Pre-Conditioned Air Equipment
SAE AS1197A-1998 Continuous Flow Oxygen Regulator
SAE AS1197-1970 Continuous Flow Oxygen Regulator
SAE AS4792B-2019 Water Conditioning Agents for Aqueous Magnetic Particle Inspection

Professional Standard - Railway, Gas phase adjustment method

TB/T 1675-2001 Air Conditioning Test Method for Railway Passenger Cars

國家市場監督管理總局、中國國家標準化管理委員會, Gas phase adjustment method

GB/T 40460-2021 Determination of plant growth regulators in fertilizers—Gas chromatography
GB/T 20738-2018 Rooftop air conditioning unit
GB/T 37500-2019 Determination of plant growth regulators in fertilizer—High performance liquid chromatography

AENOR, Gas phase adjustment method

UNE 7523-1:1997 ATMOSPHERES FOR CONDITIONING AND TESTING. DETERMINATION OF RELATIVE HUMIDITY. PART 1: ASPIRATED PSYCHROMETER METHOD.
UNE 7523-2:1997 ATMOSPHERES FOR CONDITIONING AND TESTING. DETERMINATION OF RELATIVE HUMIDITY. PART 2: WHIRLING PSYCHROMETER METHOD.
UNE-EN 88-2:2008 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
UNE 28603:1988 AIRCRAFT. GROUND AIR. CONDITIONING CONNECTIONS.

RU-GOST R, Gas phase adjustment method

GOST R ISO 187-2012 Pulps, paper, board. Standard atmosphere for conditioning and testing. Method for monitoring the atmosphere and conditioning
GOST 10681-1975 Textiles. Methods for determination atmospheric conditions for sample conditioning and testing
GOST R 51125-1998 Domestic air conditioning and pollution control equipment. Safety requirement and methods of testing
GOST 32795-2014 Fine-cut smoking tobacco and smoking articles made fromit. Methods of sampling, conditioning and analysis. Part 2. Atmosphere for conditioning and testing

FI-SFS, Gas phase adjustment method

SFS 5150-1986 Air conditioning device. Air filter testing methods
SFS 4699-1981 Air conditioning device. Stability requirements for air conditioning facilities
SFS 5512-1989 Air conditioning device. Measurement of air flow and air pressure in air conditioning systems
SFS 5329-1987 Air conditioning device. Regulators for constant airflow and varying airflow. test
SFS 5331-1987 Air conditioning device. Adjustment and closing device testing
SFS 5357-1987 Air conditioning device. Central air conditioning. Determination
SFS 5330-1987 Air conditioning device. Adjustment device and closing device. Equipment requirements
SFS 5517-1989 Air conditioning device. Determination of the acceptable range of air conditioning systems. Noise measurement
SFS 5332-1987 Air conditioning device. High-resolution air filtration vulnerability testing. concepts, units, methods
SFS 4281-1978 Air conditioning device. Round flange. Combined with gap measurement
SFS 5407-1987 Air conditioning device. Heating blower. Determination
SFS 5406-1987 Air conditioning device. Hot air blower. Determination
SFS 5358-1987 Air conditioning device. Central air conditioning. Requirements and tests

International Organization for Standardization (ISO), Gas phase adjustment method

ISO/DTS 19870:2023 Methodology for Determining the Greenhouse Gas Emissions Associated with the Production, Conditioning and Transport of Hydrogen to Consumption Gate
ISO/CD TS 19870:2011 Methodology for Determining the Greenhouse Gas Emissions Associated with the Production, Conditioning and Transport of Hydrogen to Consumption Gate
ISO 10524-2:2018 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
ISO 10524-2:2005 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
ISO 4677-2:1985 Atmospheres for conditioning and testing; Determination of relative humidity; Part 2 : Whirling psychrometer method
ISO 4677-1:1985 Atmospheres for conditioning and testing; Determination of relative humidity; Part 1 : Aspirated psychrometer method
ISO 2503:1983/Add 1:1984 Pressure regulators for gas cylinders used in welding, cutting and allied processes — Addendum 1
ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators
ISO 7292:1997 Flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification and specifications
ISO 6953-2:2023 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to include in supplier’s literature
ISO/FDIS 6953-2:2023 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to include in supplier’s literature
ISO 6953-2:2024 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to include in supplier’s literature
ISO/DIS 6953-2 Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to include in supplier’s literature
ISO 10294-1:1996 Fire resistance tests - Fire dampers for air distribution systems - Part 1: Test method
ISO 16358-2:2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Part 2: Heating seasonal performance factor
ISO 10524-3:2005 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
ISO 16358-1:2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Part 1: Cooling seasonal performance factor
ISO 10524-1:2018 Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices

Professional Standard - Machinery, Gas phase adjustment method

JB/T 3830.3-1984 Test method for marine vertical cabinet air conditioner

Association Francaise de Normalisation, Gas phase adjustment method

NF EN ISO 187:2022 Paper, cardboard and pulp - Normal conditioning and testing atmosphere and method of monitoring the atmosphere and conditioning samples
NF EN 334/IN1:2009 Gas pressure regulating devices (regulators) for inlet pressures up to 100 bar
NF EN ISO 10524-1:2019 Détendeurs pour l'utilisation avec les gaz médicaux - Partie 1 : détendeurs et détendeurs-débitmètres
NF EN ISO 2503:2009 Gas Welding Equipment - Integrated flow meter regulators and regulators for gas cylinders used for welding, cutting and related techniques up to 300 bar (30 MPa)
NF ISO 15592-2:2002 Rolling tobacco and articles made from this type of tobacco - Methods of sampling, packaging and analysis - Part 2: packaging and testing atmosphere
NF D36-302-1:2011 Pressure regulators and associated safety devices for gas appliances - Part 1 : pressure regulators for inlet pressures up to and including 500 mbar.
NF ISO 6953-3:2012 Pneumatic transmissions - Compressed air pressure regulators and filter regulators - Part 3: alternative test methods for measuring the flow characteristics of pressure reducing valves
NF EN ISO 2503/A1:2015 Gas welding equipment - Regulators and integrated flow meter regulators for gas cylinders used for welding, cutting and related techniques up to 300 bar (30 MPa) - Amendment 1
NF A84-420:1991 Equipment for gas welding and allied processes. Pressure regulators inlet connections. Dimensions.
NF EN ISO 10524-1/A1:2023 Détendeurs pour l'utilisation avec les gaz médicaux - Partie 1 : détendeurs et détendeurs-débitmètres - Amendement 1
NF EN ISO 10524-4:2008 Détendeurs pour l'utilisation avec les gaz médicaux - Partie 4 : détendeurs basse pression
NF S95-159-4*NF EN ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4 : low-pressure regulators
NF S95-178/A1:2002 Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves.
NF E49-330-2:2000 Pneumatic fluid power - Compressed air regulators and filter-regulators - Part 2 : test methods to determine the main characteristics to be included in literature from suppliers.
NF D36-302-1/IN1*NF EN 88-1/IN1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1 : pressure regulators for inlet pressures up to and including 50 kPa
NF S95-178:1998 Pressure regulators for use with medical gases. Part 3 : pressure regulators integrated with cylinder valves.
NF D36-302-1*NF EN 88-1+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1 : pressure regulators for inlet pressures up to and including 50 kPa
NF E29-795:2017 Gas cylinders - Conditioning of halogenated hydrocarbons - Filling and draining method - Reclaimation of halogenated hydrocarbons
NF E29-795:2014 Gas cylinders - Conditioning of halogenated hydrocarbons - Filling and draining method - Reclaimation of halogenated hydrocarbons
NF E29-795:1992 Gas cylinders. Conditioning of halogenated hydrocarbons. Filling and draining method. Reclaimation of halogenated hydrocarbons.
NF E49-330-2*NF ISO 6953-2:2015 Pneumatic fluid power - Compressed air pressure regulators and filter-regulators - Part 2 : test methods to determine the main characteristics to be included in literature from suppliers
NF E29-190-2:2014 Appareils de régulation de pression de gaz (régulateurs) pour réseaux de distribution et branchements - Partie 2 : régulateurs de type B
NF S95-159-1:2006 Pressure regulators for use with medical gases - Part 1 : pressure regulators and pressure regulators with flow-metering devices.
NF EN 88-1/IN1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: pressure regulators for inlet pressure less than or equal to 50 kPa
NF ISO 6953-2:2015 Pneumatic transmissions - Pressure regulators and filter-regulators for compressed air - Part 2: test methods to determine the main characteristics to be included in suppliers' documentation
NF EN ISO 10524-3:2019 Regulators for use with medical gases - Part 3: regulators integrated into gas cylinder valves (VIPR)
NF A84-420:2011 Equipment for gas welding and allied processes - Pressure regulators inlet connections - Dimensions.
NF S95-159-3:2006 Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves.

American National Standards Institute （ANSI), Gas phase adjustment method

ANSI Z21.18-2007 Gas Appliance Pressure Regulators (same as CSA 6.3)
ANSI/AHAM RAC-1-2008 Room Air Conditioners
CSA 6.18-2002(R2022) Service Regulators for Natural Gas
ANSI/ASHRAE 127-2012 Method of Testing for Rating Computer and Data Processing Room Unitary Air Conditioners
ANSI/ASHRAE 158.2-2018 Methods of Testing Capacity of Refrigerant Pressure Regulators
ANSI/ASHRAE 158.2-2011 Methods of Testing Capacity of Refrigerant Pressure Regulators

SCC, Gas phase adjustment method

BS 6427-1:1983 Conditioning of sacks for testing.-Method for conditioning paper sacks
BS 2852-1:1982 Testing for rating of room air-conditioners-Method of testing for rating of room air-conditioners for cooling performance
BS PD ISO/TS 19870:2023 Hydrogen technologies. Methodology for determining the greenhouse gas emissions associated with the production, conditioning and transport of hydrogen to consumption gate
DANSK DS/ISO/TS 19870:2023 Hydrogen technologies – Methodology for determining the greenhouse gas emissions associated with the production, conditioning and transport of hydrogen to consumption gate
MIL MIL-R-42043-1987 REGULATOR, OXYGEN
10/30205401 DC BS ISO 6953-3. Pneumatic fluid power. Compressed air pressure regulators and filter-regulators. Part 3. Alternative test methods for measuring the flow-rate characteristics of pressure regulators
BS 3554-1:1971 Specification for gas governors-Independent governors for inlet pressures up to 25 mbar
BS EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances-Pressure regulators for inlet pressures up to and including 50 kPa
BS 3554-2:1972 Specification for gas governors-Independent governors for inlet pressures up to 350 mbar
CAN/CSA-Z10524-1-2012(C2017) Regulators for use with medical gases — Part 1: Regulators and flow meter regulators
ANSI/CAN/UL/ULC 252:2023 Compressed Gas Regulators
VDI 3785 BLATT 1-2008 Environmental meteorology — methodology and presentation of results of studies on planning-relevant urban climate
FM Approvals 1363:2012 Suction Pressure Regulating Valves
DANSK DS/ISO 15592-2:2001 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 2: Atmosphere for conditioning and testing
BS 5669-1:1989 Particleboard-Methods of sampling, conditioning and test
ANSI/CAN/UL 144:2021 LP-Gas Regulators
DANSK DS/EN IEC 60665:2019 A.C. ventilating fans and regulators for household and similar purposes – Methods for measuring performance
CAN/CSA-Z10524-4-2012(C2017) Regulators for use with medical gases — Part 4: Low pressure regulators
FCI 4-1-2007 Pressure Regulator Hydrostatic Shell Test Method
CEI EN IEC 60665:2019 A.C. ventilating fans and regulators for household and similar purposes - Methods for measuring performance
FCI 4-1-2014(R2019) Pressure Regulator Hydrostatic Shell Test Method
DANSK DS/EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
NS-EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
CSA 6.3:19/ANSI Z21.18-2019(R2024) Gas Appliance Pressure Regulators
CSA 6.3-2000(R2006) Gas Appliance Pressure Regulators
CSA 6.3:19/ANSI Z21.18-2019 Gas Appliance Pressure Regulators
CSA ANSI Z21.18-2007 (R2017)/CSA 6.3-2007(R2016) Gas Appliance Pressure Regulators
UNE-EN 88-1:2008 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar
NS-EN 88-1:2007 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar
ULC ORD-C252-1975 Guide for the Investigation of Gas Pressure Regulators
CSA/ANSI Z21.18:19 ? CSA 6.3-2019 Gas appliance pressure regulators
CAN/CSA-Z10524-3-2012(C2017) Regulators for use with medical gases — Part 3: Regulators integrated into gas cylinder valves
04/30111044 DC EN 88-1. Pressure governors and associated safety devices for gas appliances. Part 1. Pressure governors for inlet pressures up to 500 mbar
AENOR UNE 20443:1983 Jet fans and associated speed regulators.
BS 3016-1:1958 Pressure regulators for use with butane/propane gases. Low pressure regulators for use with butane gas
BS 3016-3:1960 Pressure regulators for use with butane/propane gases. Variable high pressure regulators
NS-EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
DANSK DS/EN 88-1+A1:2016 Pressure regulators and associated safety devices for gas appliances – Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
BS 3016-2:1960 Pressure regulators for use with butane/propane gases. Low pressure regulators for use with propane gas
AS 1441.1:1973 Methods of test for coated fabrics, Method 1: Conditioning of test specimens
DIN 53102:1968 Testing of paper and board; method for the conditioning of samples
UNE-EN 13787:2003 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar.
NS-EN 13787:2001 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
CAN/CSA Z10524-4-2012(R2022) Pressure regulators for use with medical gases - Part 4: Low-pressure regulators
DANSK DS/EN ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators
BS 3431:1973 Method for the conditioning of paper and board for testing
SPC GB/T 37500-2019 Determination of plant growth regulators in fertilizer -- High performance liquid chromatography (TEXT OF DOCUMENT IS IN CHINESE)
AENOR UNE-EN 88-2:2008 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
NS-EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances — Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
DANSK DS/EN ISO 2503:2009 Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
DANSK DS/EN ISO 2503/A1:2009 Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
NS-EN 738-3:1998 Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder valves
UNE-EN 738-3:1999 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES
CAN/CSA-Z10524-2-2012(C2017) Regulators for use with medical gases — Part 2: Pipe and rail regulators
BS EN ISO 10524-2:2006 Pressure regulators for use with medical gases-Manifold and line pressure regulators

BE-NBN, Gas phase adjustment method

NBN 232-13-1970 Pneumatic adjustment
NBN D 51-002-1972 Central heating, ventilation and air conditioning. moderation feed
NBN D 17-001-1975 Central heating, ventilation and air conditioning, regulators and gas expanders

Group Standards of the People's Republic of China, Gas phase adjustment method

T/ZZB 1023-2019 Pneumatic control valves for petroleum， petrochemical， natural gas and related industries
T/GXAS 004-2017 Gas Chromatographic Analysis Method of Longifolene in Heavy Turpentine Oil
T/QGCML 2676-2023 Gas storage type pneumatic regulating valve
T/GXAS 003-2017 Gas chromatography analysis method of caryophyllene in heavy turpentine
T/SSR 701-2019 The evaluation values and testing method of long-term energy conservation for heat exchangers used in room air-conditioners
T/SDAQI 058-2021 Determination of Plant Growth Regulator in Water Soluble Fertilizer by Gas Chromatography-Mass Spectrometry
T/GDAR 0001-2020 Performance requirements and test methods for virus and oil eliminating for air conditioners
T/CAB 0079-2020 Test and evaluation method for room air conditioner with easily disassemble and cleaning function
T/CRAAS 1203-2023 Reliability evaluation method for air conditioners used in data centers and base stations
T/CAGDE 005-2017 Room air conditioners
T/CAS 442-2020 Multi mode sterilization function requirements and test methods for room air conditioners
T/CAEE 001-2023 Carbon emission assessment methods and requirements for the entire life cycle of room air conditioners
T/CAS 744-2023 Test method for corrosion resistance of aluminum heat exchangers for room air conditioners
T/QGCML 1954-2023 High pressure difference resistant pneumatic regulating valve
T/QGCML 1487-2023 General specifications for pneumatic regulating valves
T/CASME 17-2022 Pneumatic diaphragm single seat regulating valve
T/CAB CSISA0030-2020 Test and Evaluation for Artificial Thermal Environment Comfort Part 1: Room Air Conditioner
T/CAS 234-2014 Air Jet Type Room Air Conditioners
T/CAS 299-2018 Room air conditioner with air cleaning function
T/CAMS /CICEIA67-2021 Electronic control regulating valve for diesel engine
T/CEC 533-2021 Technical specification for three-phase unbalance adjustment energy-saving device in low-voltage station area
T/CAB 0100-2021 Room air conditioner with huge air volume
T/ZZB 0234-2017 Non-adjustable gas utility lighter
T/ZZB 3080-2023 Passive residential air conditioner
T/ZZB 0100-2016 Non-adjustable gas lighter

GSO, Gas phase adjustment method

GSO ISO 4677-2:2008 Atmospheres for conditioning and testing-Determination of relative humidity-Part 2 : Whirling Psychrometer Method
OS GSO ISO 6953-3:2016 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
GSO ISO 6953-3:2016 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
OS GSO ISO 4677-1:2008 Atmospheres for conditioning and testing-Determination of relative humidity-Part 1 : Aspirated psychrometer method
GSO ISO 4677-1:2008 Atmospheres for conditioning and testing-Determination of relative humidity-Part 1 : Aspirated psychrometer method
OS GSO 587:1995 METHODS OF TEST FOR LOW PRESSURE REGULATORS FOR VALVES OF LIQUEFIED PETROLEUM GAS CYLINDERS
OS GSO ISO 4677-2:2008 Atmospheres for conditioning and testing-Determination of relative humidity-Part 2 : Whirling Psychrometer Method
GSO 587:1995 METHODS OF TEST FOR LOW PRESSURE REGULATORS FOR VALVES OF LIQUEFIED PETROLEUM GAS CYLINDERS
BH GSO ISO 15592-2:2016 Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 2: Atmosphere for conditioning and testing
GSO ISO 15592-2:2013 Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 2: Atmosphere for conditioning and testing
GSO ISO 2503:2010 Gas welding equipment -- Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
GSO ISO 10524-4:2015 Pressure regulators for use with medical gases -- Part 4: Low-pressure regulators
BH GSO ISO 6953-2:2016 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
OS GSO ISO 6953-2:2015 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
GSO ISO 6953-2:2015 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to determine the main characteristics to be included in literature from suppliers
OS GSO ISO 10524-4:2015 Pressure regulators for use with medical gases -- Part 4: Low-pressure regulators
GSO ISO 187:2002 Paper board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples.

British Standards Institution (BSI), Gas phase adjustment method

PD ISO/TS 19870:2023 Hydrogen technologies. Methodology for determining the greenhouse gas emissions associated with the production, conditioning and transport of hydrogen to consumption gate
BS ISO 15592-2:2001 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Atmosphere for conditioning and testing
BS EN 738-2:1999 Pressure regulators for use with medical gases - Manifold and line pressure regulators
BS EN ISO 10524-4:2009 Pressure regulators for use with medical gases. Low-pressure regulators
BS EN ISO 10524-4:2008 Pressure regulators for use with medical gases - Low-pressure regulators
BS EN ISO 10524-3:2006+A1:2013 Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves
BS EN ISO 10524-3+A1:2008 Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves
BS EN ISO 10524-3:2008 Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves
BS ISO 6953-2:2015 Pneumatic fluid power. Compressed air pressure regulators and filter-regulators. Test methods to determine the main characteristics to be included in literature from suppliers
BS EN ISO 10524-3:2006 Pressure regulators for use with medical gases - Pressure regulators integrated with cylinder valves
BS EN 738-3:1999 Pressure regulators for use with medical gases - Pressure regulators integrated with cylinder valves
BS EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures up to and including 50 kPa
BS ISO 10294-3:1999 Fire-resistance tests - Fire dampers for air distribution systems - Guidance on the test method
BS ISO 16358-1:2013 Air-cooled air conditioners and air-to-air heat pumps. Testing and calculating methods for seasonal performance factors. Cooling seasonal performance factor
BS ISO 16358-1:2013+A1:2019 Air-cooled air conditioners and air-to-air heat pumps. Testing and calculating methods for seasonal performance factors. Cooling seasonal performance factor
BS ISO 16358-2:2013 Air-cooled air conditioners and air-to-air heat pumps. Testing and calculating methods for seasonal performance factors. Heating seasonal performance factor
BS EN 738-1:1997 Pressure regulators for use with medical gases - Pressure regulators and pressure regulators with flow metering devices
BS EN ISO 10524-2:2007 Pressure regulators for use with medical gases - Manifold and line pressure regulators
BS ISO 10263-4:2009 Earth-moving machinery - Operator enclosure environment - Heating, ventilating and air conditioning (HVAC) test method and performance
BS EN ISO 10524-3:2019 Pressure regulators for use with medical gases. Pressure regulators integrated with cylinder valves (VIPRs)
BS ISO 6953-2:2024 Pneumatic fluid power. Compressed air pressure regulators and filter-regulators - Part 2: Test methods to determine the main characteristics to include in supplier’s literature
BS EN ISO 10524-1:2019+A1:2023 Pressure regulators for use with medical gases. Pressure regulators and pressure regulators with flow-metering devices
BS EN IEC 60665:2019 A.C. ventilating fans and regulators for household and similar purposes. Methods for measuring performance
BS EN ISO 10524-1:2019 Pressure regulators for use with medical gases. Pressure regulators and pressure regulators with flow-metering devices
BS ISO 10294-1:1997 Fire-resistance tests - Fire dampers for air distribution systems - Test method
BS EN 738-4:1999 Pressure regulators for use with medical gases - Low-pressure regulators intended for incorporation into medical equipment
BS 2782-10 Method 1004:1977 Methods of testing plastics. Glass reinforced plastics. Standard atmospheres for conditioning and testing
BS EN 12078:1998 Zero governors for gas burners and gas burning appliances
BS EN 88-1:2007 Pressure regulators and associated safety devices for gas appliances - Pressure regulators for inlet pressures up to and including 500 mbar
BS EN ISO 10524-2:2019 Pressure regulators for use with medical gases. Manifold and line pressure regulators

Professional Standard-Ships, Gas phase adjustment method

CB/Z 232-1986 Calculation method for air conditioning system design of surface warships

Professional Standard - Agriculture, Gas phase adjustment method

GB/T 42954-2023 Determination of Plant Growth Regulators in Fertilizers by Gas Chromatography-Mass Spectrometry

CZ-CSN, Gas phase adjustment method

CSN 07 8685-1981 Argon regulator
CSN 07 8681-1981 Hydrogen regulator
CSN 07 8677-1981 Oxygen regulators
CSN 30 3561-1961 Air brakes. Pressure regulátor
CSN 18 5305-1986 Pneumatic regulators for automation. Classification, generál technical require-ments and testing methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gas phase adjustment method

GB/T 4213-2008 Pneumatic industrial process control valves
GB 8201-1987 Analytical method of content for fosamine aqueous solution
GB/T 7725-2022 Room air conditioner
GB/T 7725-1996 Room air conditioners
GB/T 7725-2004 Room air conditioners
GB/T 17758-1999 Unitary air conditioners
GB/T 24985-2010 Test methods for reliability on household and similar room air conditioners
GB/T 17758-2023 Unit air conditioner
GB/T 17758-2010 Unitary air conditioners
GB/T 13409-1992 Air-conditioning and ventilation of accommodation spaces on board ships--Design parameter and method of calculations
GB/T 20738-2006 Rooftop air conditioning unit
GB/T 17981-2007 Economic operation of air conditioning systems
GB/T 17981-2000 Economic operation of air conditioning systems

中華人民共和國國家質量監督檢驗檢疫總局、中國國家標準化管理委員會, Gas phase adjustment method

GB/T 35972-2018 Energy-saving commissioning method of heating and air conditioning system
GB/T 33029-2016 Composition of turpentine and related terpene products—Test methods of capillary gas chromatography

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Gas phase adjustment method

ITU-R S.742-1992 Spectrum Utilization Methodologies - Section 4D2 - Coordination Methods

Taiwan Provincial Standard of the People's Republic of China, Gas phase adjustment method

CNS 6874-1989 Method of Measurment of Air Quantity for Ventiation and Air Conditioning System
CNS 3615-2004 Non-ducted air conditioners

Professional Standard - Automobile, Gas phase adjustment method

QC/T 38-1992 Bench test method for air pressure regulation protection device of automobile and trailer
QC/T 76.9-1993 Mining dump truck test method air conditioning system performance test
QC/T 656-2023 Heating ventilation and air conditioning assembly for automotive air conditioning
QC/T 37-2015 Automobile and trailer.Specifications and test methods of bench for pressure regulator and protector

Hebei Provincial Standard of the People's Republic of China, Gas phase adjustment method

DB13/T 1610-2012 Phase-change energy-saving heat storage and temperature-adjusting materials

CEN - European Committee for Standardization, Gas phase adjustment method

EN ISO 10524-2:2019 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
EN ISO 10524-3:2019 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs)
EN 88-1:2007 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar
EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa

PT-IPQ, Gas phase adjustment method

NP 107-1962 Tolérances et ajustements. Terminologie
NP HD 516-2000 Guide to use of low voltage harmonized cables

American Society for Testing and Materials (ASTM), Gas phase adjustment method

ASTM E41-92(1998) Terminology Relating to Conditioning
ASTM D6387-19 Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
ASTM D6387-19(2023) Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
ASTM D7823-16 adjunct Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption&x2014;Gas Chromatography/Mass Spectrometry
ASTM D7823-16 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption&x2014;Gas Chromatography/Mass Spectrometry
ASTM D7823-14 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly &40;Vinyl Chloride&41; Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry
ASTM D6387-99(2014)e1 Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
ASTM D4920-13 Standard Terminology Relating to Conditioning, Chemical, and Thermal Properties

Professional Standard - Aviation, Gas phase adjustment method

HBm 47-1986 Indoor air conditioner
HB 6504-1991 General specification for oxygen regulators

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Gas phase adjustment method

ASHRAE EQUIP IP CH 4-2008 AIR HANDLING AND DISTRIBUTION
ASHRAE 90138-2009 DAMPERS AND AIRFLOW CONTROL

BR-ABNT, Gas phase adjustment method

ABNT P-MB-186-1972 Air conditioner facilities
ABNT P-EB-110-1955 Petroleum Liquefied Gas Pressure Regulator

Professional Standard - Chemical Industry, Gas phase adjustment method

HG/T 2981-1987(1997) Analytical method of content for fosamine aqueous solution
HG/T 2981-1987 Analytical method of content for fosamine aqueous solution

Underwriters Laboratories (UL), Gas phase adjustment method

UL 252-2017 UL Standard for Safety Compressed Gas Regulators (Tenth Edition; Reprint with Revisions Through and Including August 10@ 2018)
UL 252-2010 UL Standard for Safety Compressed Gas Regulators (Ninth Edition; Reprint with Revisions Through and Including January 28, 2015)
UL 144-2021 UL Standard for Safety LP-Gas Regulators
UL 144-1999 UL Standard for Safety LP-Gas Regulators Seventh Edition; Reprint with Revisions Through and Including January 18,2002
UL 252-1984 Compressed gas regulators
UL 252A-2019 Compressed gas regulator accessories
UL 252A-2003 Compressed gas regulator accessories

Compressed Gas Association (U.S.), Gas phase adjustment method

CGA E-4-2016 Standard for gas pressure regulators
CGA E-4-2006 STANDARD FOR GAS PRESSURE REGULATORS FIFTH EDITION

U.S. Air Force, Gas phase adjustment method

AIR FORCE A-A-59721 VALID NOTICE 1-2009 Load, Bank, Electrical

未注明發布機構, Gas phase adjustment method

DIN EN ISO 10524-2 E:2017-04 Pressure regulators for medical gases Part 2: Inlet pressure regulators and linear pressure regulators (draft)
AS 2913:2000(R2016) Evaporative air-conditioning equipment
SAE AS1197B-2023 Continuous Flow Oxygen Regulator
CSA 6.18-2002(R2017) Service Regulators for Natural Gas
CAN/CSA-Z10524-4-2012(R2017) Pressure regulators for use with medical gases — Part 4: Low-pressure regulators
SAE AS8027-2023 Crew Member Oxygen Regulators, Demand
DIN EN ISO 10524-3:2006 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves

Shanghai Provincial Standard of the People's Republic of China, Gas phase adjustment method

DB31/T 941.1-2015 Evaluation method for top runner on ernergy conservation (domestic electrical appliances).Part 1:Room air conditioners

工業和信息化部/國家能源局, Gas phase adjustment method

JB/T 13289-2017 Technical specifications for cam phase adjusters for variable valve systems in internal combustion engines

Professional Standard - Environmental Protection, Gas phase adjustment method

HJBZ 18-1997 Energy saving, low noise room air conditioner
HJ 696-2014 Water quality.Determination of turpentine.Gas chromatography method

Professional Standard - Electron, Gas phase adjustment method

SJ/T 31438-1994 Integrity requirements and inspection and assessment methods for heat pump room air conditioners
SJ 1860-1981 Measurement of AM-PM conversion coefficient of power klystrons
SJ/T 10870-1996 Methods of measurement for electrical properties of disk-seal tubes - Methods of measurement for the AM-PM conversion coefficient
SJ 1713-1981 Measurement of phaseshift of power klystrons

Underwriter Laboratories of Canada (ULC), Gas phase adjustment method

CSA ANSI/CAN/UL 144-2021 LP-Gas Regulators

HU-MSZT, Gas phase adjustment method

MNOSZ 14635-1956 Surveying prints. Two-point adjustment method

German Institute for Standardization, Gas phase adjustment method

DIN EN ISO 10524-2:2006 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005); English version of DIN EN ISO 10524-2:2006-07
DIN EN 88-1:2016-06 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa; German version EN 88-1:2011+A1:2016 / Note: To be replaced by DIN EN 88-1 (2020-06).
DIN EN 88-2:2008 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; English version of DIN EN 88-2:2008-03
DIN EN 88-1:2020-06 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa; German and English version prEN 88-1:2020 / Note: Date of issue 2020-05-08*Intended as replacement for DI...
DIN EN ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008); German version EN ISO 10524-4:2008
DIN EN 88-2:2020-06 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; German and English version prEN 88-2:2020 / Note: Date of issue 2020-05-08*Intended as repl...
DIN EN 88-1:2020 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa; German and English version prEN 88-1:2020
DIN EN 88-1:2008 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar; English version of DIN EN 88-1:2008-04
DIN ISO 15592-2:2005-05 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 2: Atmosphere for conditioning and testing (ISO 15592-2:2001)
DIN EN ISO 10524-4:2008-09 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008); German version EN ISO 10524-4:2008
DIN EN 88-2:2008-03 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; German version EN 88-2:2007 / Note: To be replaced by DIN EN 88-2 (2015-01), DIN EN 88-2 (2...

Beijing Provincial Standard of the People's Republic of China, Gas phase adjustment method

DB11/T 1538-2018 Split air conditioner energy saving monitoring

Danish Standards Foundation, Gas phase adjustment method

DS/ISO 15592-2:2001 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 2: Atmosphere for conditioning and testing
DS/EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
DS/EN ISO 10524-4:2008 Pressure regulators for use with medical gases - Part 4: Low-pressure regulators
DS/EN 88-2:2008 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
DS/EN 13787:2002 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar

United States Navy, Gas phase adjustment method

NAVY MIL-G-18916 (3)-1985 GOVERNORS, STEAM DRIVEN PUMP PRESSURE REGULATING, NAVAL SHIPBOARD
NAVY MIL-G-18916-1955 GOVERNORS, STEAM DRIVEN PUMP PRESSURE REGULATING, NAVAL SHIPBOARD
NAVY MIL-C-19064 B VALID NOTICE 1-1991 CONNECTOR, OXYGEN HOSE TO REGULATOR
NAVY MIL-C-19064 B NOTICE 3-2005 CONNECTOR, OXYGEN HOSE TO REGULATOR
NAVY MIL-C-19064 B-1964 CONNECTOR, OXYGEN HOSE TO REGULATOR
NAVY MIL-C-19064 B (2)-1978 CONNECTOR, OXYGEN HOSE TO REGULATOR
NAVY MIL-A-19865 C-1990 AIR CONDITIONER, MECHANICALLY REFRIGERATED
NAVY MIL-R-6018 C-1966 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY MIL-R-6018 C (1)-1971 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY MIL-R-6018 C NOTICE 1-1996 REGULATOR, OXYGEN, DILUTER DEMAND
NAVY QPL-23098-12 NOTICE 1-2008 Regulators, Line Voltage, Single Phase, 400 Hertz A.C. Naval Shipboard

IN-BIS, Gas phase adjustment method

IS 6901-1988 Specification for gas cylinder pressure regulators for use in welding, cutting and related processes
IS 2943-1991 Raw silk—Method for determination of regulated size (count)
IS 1391-1971 Specifications for indoor air conditioners
IS 10936-1984 Heald frame coordination dimensions related to heald frame pitch

European Committee for Standardization (CEN), Gas phase adjustment method

EN ISO 10524-2:2006 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
EN 88-2:2022 Safety and control devices for gas burners and gas burning appliances - Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
EN 585:1994 Gas Welding Equipment - Pressure Regulators for Gas Cylinders Used in Welding, Cutting and Allied Process up to 200 Bar

Guangdong Provincial Standard of the People's Republic of China, Gas phase adjustment method

DB44/T 1462.2-2014 Cloud Technology Applied Room Air Conditioner Part 2: Cloud Room Air Conditioner

ES-UNE, Gas phase adjustment method

UNE-EN IEC 60665:2019 A.C. ventilating fans and regulators for household and similar purposes - Methods for measuring performance
UNE-EN 88-1:2012+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa

KR-KS, Gas phase adjustment method

KS B 8213-2009(2024) Pressure regulators and associated safety devices for gas appliances－Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
KS B ISO 2503-1-2002 Gas welding equipment－Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar
KS C IEC 60665-2023 A.C. ventilating fans and regulators for household and similar purposes — Methods for measuring performance
KS B 6213-2009(2024) Liquefied petroleum gas regulators for domestic use
KS W 5092-2003(2023) AC generators and associated regulators for aircraft

ET-QSAE, Gas phase adjustment method

ES O.B9.020-1973 Paper and board method for conditioning test specimens

Lithuanian Standards Office , Gas phase adjustment method

LST EN 88-1-2011 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
LST EN 13787-2002 Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar
LST EN 88-2-2008 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar

VN-TCVN, Gas phase adjustment method

TCVN 7741-4-2010 Pressure regulators for use with medical gases.Part 4: Low-pressure regulators
TCVN 7741-3-2007 Pressure regulators for use with medical gases.Part 3: Pressure regulators integrated with cylinder valves
TCVN 7741-1-2007 Pressure regulators for use with medical gases.Part 1: Pressure regulators and pressure regulators with flow-metering devices

Defense Logistics Agency, Gas phase adjustment method

DLA MIL-R-19180 B-1989 REGULATOR, PRESSURE, COMPRESSED GAS
DLA MIL-R-19180 B NOTICE 1-1998 REGULATOR, PRESSURE, COMPRESSED GAS

Professional Standard - Medicine, Gas phase adjustment method

YY/T 1439.2-2016 Pressure regulators for use with medical gases.Part 2:Manifold and line pressure regulators

JSAE - Society of Automotive Engineers of Japan@ Inc., Gas phase adjustment method

JASO C449-1980 Air Brake Slack Adjuster

ES-AENOR, Gas phase adjustment method

UNE 100-152-1988 Air conditioning. Pipe bearing capacity

UNKNOWN, Gas phase adjustment method

YY 0116-1993 Medical room air conditioner
YY 0116-93 Medical room air conditioner

Professional Standard - Commodity Inspection, Gas phase adjustment method

SN/T 3935-2014 Determination of uniconazole class of plant growth regulators residues in foods for export.GC-MS method

RO-ASRO, Gas phase adjustment method

STAS 10750-1988 Ventilating and air conditioning installations DAMPERS Classification and typification

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Gas phase adjustment method

ASHRAE 79-2015 Method of Testing for Rating Fan-Coil Conditioners
ASHRAE 158.2-2006 Methods of Testing Capacity of Refrigerant Pressure Regulators
ASHRAE 79-2002 Method of Testing for Rating Fan-Coil Conditioners
ASHRAE 158.2-2011 Methods of Testing Capacity of Refrigerant Pressure Regulators
ASHRAE 79 ERTA-2014 Method of Testing for Rating Fan-Coil Conditioners
ASHRAE 158.2-2018 Methods of Testing Capacity of Refrigerant Pressure Regulators
ASHRAE 3640-1993 Method to Account for Energy Conservation Measure Interactions

國家能源局, Gas phase adjustment method

NB/T 10327-2019 Low-voltage active three-phase unbalance adjustment device

Professional Standard - Petroleum, Gas phase adjustment method

SY/T 7066-2016 Calculation method of energy saved for gas field
SY 7066-2016 Gas Field Energy Saving Calculation Method

Henan Provincial Standard of the People's Republic of China, Gas phase adjustment method

DB41/T 1359-2016 Explosion-proof unit air conditioner

Sichuan Provincial Standard of the People's Republic of China, Gas phase adjustment method

DB51/T 2225-2016 Test method for controlled atmosphere storage of fruits and vegetables

暖暖爱视频免费,国产成人涩涩涩视频在线观看,中文在线中文资源,日本亚洲色大成网站WWW久久