ZH
KR
JP
ES
RU
DE

temperature shunt

temperature shunt, Total:368 items.

In the international standard classification, temperature shunt involves: Coals, Road vehicle systems, Resistors, Pipeline components and pipelines, Rotating machinery, Packaging and distribution of goods in general, Burners. Boilers, Welding, brazing and soldering, Installations in buildings, Semiconductor devices, Thermodynamics and temperature measurements, Electrical accessories, Rubber and plastics products, Iron and steel products, Automatic controls for household use, Cans. Tins. Tubes, Powder metallurgy, Measurement of volume, mass, density, viscosity, Audio, video and audiovisual engineering, Fluid storage devices, Electromechanical components for electronic and telecommunications equipment, Electricity. Magnetism. Electrical and magnetic measurements, Valves, Aerospace electric equipment and systems, On-board equipment and instruments, Electronic components in general, Fruits. Vegetables, Plastics, Internal combustion engines for road vehicles, Aerospace fluid systems and components, Ventilators. Fans. Air-conditioners, Fibre optic communications, Refrigerating technology, Cases. Boxes. Crates, Aircraft and space vehicles in general, Metrology and measurement in general, Equipment for petroleum and natural gas industries, Natural gas, Refractories, Transformers. Reactors, Shipbuilding and marine structures in general, Gas and steam turbines. Steam engines.

CH-SNV, temperature shunt

• VSM 34152-1946 Sensor overflow tube of thermostat for electronic warm water storage
• VSM 33720-1972 Overflow pipe of the thermostat of the electronic hot water storage device
• SNV 742 402.17-1970 Temperature regulator with electronic warm water storage

Professional Standard - Coal, temperature shunt

• MT/T 853.2-2000 Classification for flow temperature of coal ash

Society of Automotive Engineers (SAE), temperature shunt

• SAE J2685-2014 Positive Temperature Coefficient Overcurrent Protection Devices (PTCs)
• SAE AS413-1948 TEMPERATURE INDICATOR
• SAE AS413A-1954 TEMPERATURE INDICATOR
• SAE AS14105A-2007 (R) CIRCUIT BREAKER - AIRCRAFT, TRIP-FREE, PUSH PULL, 25 THRU 35 AMPS, TYPE I -55 TO +121 °C
• SAE MA2001B-2015 Aerospace Fluid Systems and Components - Pressure and Temperature Classifications
• SAE MA2001A-2011 AEROSPACE FLUID SYSTEMS AND COMPONENTS - PRESSURE AND TEMPERATURE CLASSIFICATIONS
• SAE MA2001-1981 AEROSPACE FLUID SYSTEMS AND COMPONENTS - PRESSURE AND TEMPERATURE CLASSIFICATIONS
• SAE AS2001A-2013 Aerospace Fluid Systems and Components – Pressure and Temperature Classifications

U.S. Military Regulations and Norms, temperature shunt

• ARMY MS24537 REV C-1967 TRANSMITTER, TEMPERATURE ELECTRICAL RESISTANCE - 24 VOLT DC
• ARMY MS24537 REV C VALID NOTICE 3-2000 TRANSMITTER, TEMPERATURE ELECTRICAL RESISTANCE - 24 VOLT DC
• ARMY MS24542 REV H-1987 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE; 24 VOLT DC, RANGE 160 DEG.-320 DEG. F
• ARMY MS24543 REV H VALID NOTICE 2-2000 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE; 24 VOLT DC, RANGE 120 DEG. -240 DEG. F
• ARMY MS24542 REV H VALID NOTICE 2-2000 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE; 24 VOLT DC, RANGE 160 DEG.-320 DEG. F
• ARMY MS24543 REV H-1985 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE; 24 VOLT DC, RANGE 120 DEG. -240 DEG. F

National Metrological Verification Regulations of the People's Republic of China, temperature shunt

• JJG 2030-1989 Verification Scheme of Measuring Instruments for Colour Temperature (Distribution Temperature)
• JJG(化工) 19-1989 Temperature Transmitter Verification Regulations

American Society for Testing and Materials (ASTM), temperature shunt

• ASTM F1201-88(2004) Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0176F
• ASTM B114-07(2018) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
• ASTM B114-07 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
• ASTM B114-07(2013) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
• ASTM E2509-14 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
• ASTM E2509-21 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
• ASTM E2509-08 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode

CZ-CSN, temperature shunt

• CSN ON 02 7215-1963 Thermometer cell for high speed flow. For resistance thermometers, electric thermometers and glass thermometers
• CSN ON 02 7321-1963 Welding repair thermometer. high speed flow
• CSN ON 02 7216-1963 High-speed flow pressure thermometer
• CSN 25 7805-1980 Multi-flow turbině water meters; up-to 30 °C
• CSN 25 7806-1980 Multi-flow turbine water meters; up-to 95 °C
• CSN 25 7804-1980 Single-flow turbině water meters; up-to 95 °C
• CSN 25 8306-1987 Industrial resistance temperature sensors
• CSN 25 8217-1964 Manometric thermometers for transformers

RU-GOST R, temperature shunt

• GOST 27895-1988 Rotating electrical machines. Built-in thermal protection. General rules for thermal protectors used in thermal protection systems
• GOST 21342.12-1976 Varistors. Method of measuring voltage and current temperature

SCC, temperature shunt

• VDI/VDE 2640 BLATT 4-1983 Network measurements in flow cross sections; determination of the average temperature in flowing liquids
• BS M 51:1982 Classification for pressure and temperature for fluid systems and components
• BS 1041-7:1964 Code for temperature measurement-Temperature/time indicators
• VDI/VDE 3512 BLATT 2-2017 Temperature measurement for building automation — temperature sensors, temperature probes and their measurement parameters
• AS 2872:1988 Atmospheric heating of vessels containing fluids - Estimation of maximum temperature
• DANSK DS/EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
• DANSK DS/EN 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating
• CEI EN 60512-5-2:2003 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating
• CEI EN 60751:2009 Industrial platinum resistance thermometers and platinum temperature sensors
• CSA C22.2 No.24-1993(C2013) Temperature indicators and regulators
• DANSK DS/EN IEC 60751:2022 Industrial platinum resistance thermometers and platinum temperature sensors
• CEI EN IEC 60751:2022 Industrial platinum resistance thermometers and platinum temperature sensors
• VDI/VDE 3512 BLATT 4-2017 Temperature measurement for building automation — Testing of temperature sensors
• DANSK DS/EN 12300:1999 Cryogenic vessels – Cleanliness for cryogenic service
• BS EN ISO 23208:2019 Cryogenic vessels. Cleanliness for cryogenic service
• NS-EN 12300:1998 Cryogenic vessels — Cleanliness for cryogenic service
• CEI EN 61757-2-1:2022 Fiber optic sensors Part 2-1: Temperature measurement - Temperature sensors based on fiber Bragg gratings
• BS EN 2665-001:1999 Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A-Technical specification
• NS-EN 14597:2005 Temperature control devices and temperature limiters for heat generating systems
• VDI/VDE 3512 BLATT 3-2009 Temperature measurement for building automation — installation of temperature sensors
• DANSK DS/EN IEC 61757-2-1:2021 Fibre optic sensors – Part 2-1: Temperature measurement – Temperature sensors based on fibre Bragg gratings
• DANSK DS/EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
• BS EN 2794-001:1999 Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A-Technical specification
• UNE-EN 14597:2006 Temperature control devices and temperature limiters for heat generating systems
• NS-EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
• AENOR UNE-EN 14597:2014 Temperature control devices and temperature limiters for heat generating systems
• DIN EN IEC 60751:2023 Industrial platinum resistance thermometers and platinum temperature sensors (IEC 60751:2022); German version EN IEC 60751:2022
• VDI/VDE 3512 BLATT 3-2009 Temperature measurement for building automation — installation of temperature sensors
• VDI/VDE 3512 BLATT 4-2017 Temperature measurement for building automation — Testing of temperature sensors
• VDI/VDE 3512 BLATT 2-2017 Temperature measurement for building automation — temperature sensors, temperature probes and their measurement parameters
• DIN EN 14597 E:2011 Draft Document - Temperature control devices and temperature limiters for heat generating systems; German version prEN 14597:2011
• DANSK DS/EN ISO 21028-2:2018 Cryogenic vessels – Toughness requirements for materials at cryogenic temperature – Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)
• NS-EN ISO 21028-2:2018 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)
• DANSK DS/EN ISO 23208:2019 Cryogenic vessels – Cleanliness for cryogenic service (ISO 23208:2017)
• DANSK DS/EN ISO 21028-1:2016 Cryogenic vessels – Toughness requirements for materials at cryogenic temperature – Part 1: Temperatures below -80 °C
• UNE-EN 1252-1/AC:1999 CRYOGENIC VESSELS. MATERIALS. PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURES BELOW -80oC.
• NS-EN 1252-1:1998 Cryogenic vessels — Materials — Part 1: Toughness requirements for temperatures below -80°C
• AENOR UNE-EN 1252-2:2002 Cryogenic containers. Materials. Part 2: Toughness requirements at temperatures between -80 oC and -20 oC.
• ASD-STAN PREN 2995-001:2005 Aerospace Series Circuit Breakers, Single-Pole, Temperature Compensated, Rated Current 1 A to 25 A Part 001: Technical Specification
• ASD-STAN PREN 2665-001:2012 Aerospace series Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A Part 001: Technical specification
• NS-EN 2794-001:1999 Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification
• ASD-STAN PREN 2794-001:2012 Aerospace series Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A Part 001: Technical specification

Korean Agency for Technology and Standards (KATS), temperature shunt

• KS T 1026-2006(2011) Standard packaging container of sap for low temperature distribution
• KS B 6156-2003 Temperature limiters and thermostats for hot water boilers
• KS B 6156-2014 Temperature limiters and thermostats for hot water boilers
• KS C 0076-1990 Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
• KS B 6156-2019 Temperature limiters and thermostats for hot water boilers
• KS C IEC 60512-5-2:2003 Connectors for electronic equipment-Tests and measurements-Part 5-2:Current-carrying capacity tests-Test 5b:Current-temperature derating
• KS C IEC 60512-5-2-2003(2008) Connectors for electronic equipment－Tests and measurements－Part 5－2：Current－carrying capacity tests－Test 5b：Current－temperature derating
• KS C IEC 60512-5-2:2014 Connectors for electronic equipment-Tests and measurements-Part 5-2:Current-carrying capacity tests-Test 5b:Current-temperature derating
• KS C IEC 60255-8-2003(2008) Electrical relays－Part 8：Thermal electrical relays
• KS R 3036-1987 Thermostat
• KS B ISO 21028-1-2022 Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
• KS B 6154-2006 Room thermostats
• KS W 0649-2003 Aerospace-Fluid systems and components-Pressure and temperature classifications
• KS W 0649-2013 AEROSPACE - FLUID SYSTEMS AND COMPONENTS - PRESSURE AND TEMPERATURE CLASSIFICATIONS
• KS B ISO 23208:2018 Cryogenic vessels — Cleanliness for cryogenic service
• KS W 0649-2003(2008) AEROSPACE - FLUID SYSTEMS AND COMPONENTS - PRESSURE AND TEMPERATURE CLASSIFICATIONS
• KS T 1021-2010 Standard packaging container for low temperature distribution
• KS B ISO 21028-1:2017 Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
• KS T 1021-2018 Standard boxes and containers for cold chain logistics of agricultural products
• KS B ISO 21028-1:2006 Cryogenic vessels-Toughness requirements for material at cryogenic temperature-Part 1:Temperatures below-80 ℃
• KS B ISO 21028-2:2021 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature —Part 2: Temperatures between ?80 ℃ and ?20 ℃
• KS B ISO 21028-1-2017(2022) Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
• KS M ISO 8310-2013 Refrigerated light hydrocarbon fluids－Measurement of temperature in tanks containing liquefied gases－Resistance thermometers and thermocouples
• KS C IEC 60749-11:2020 Semiconductor devices — Mechanical and climatic test methods —Part 11: Rapid change of temperature — Two-fluid-bath method
• KS T 1025-2006 Standard transport container of pine mushroomfor low temperature distribution
• KS B ISO 21028-2-2006(2016) Cryogenic vessels－Toughness requirements for materials at cryogenic temperature－Part 2：Temperatures between －80 ℃ and －20℃

HU-MSZT, temperature shunt

• MSZ 9650/23-1978 Determination of fluidity temperature for paint detection
• MNOSZ 154-1954 Basic instruments for measuring temperature

Indonesia Standards, temperature shunt

• SNI 05-6047.1-1999 Heat exchanger - Method for parameter measurement for performance determination. Part 1: Temperature and fluid quality

European Committee for Standardization (CEN), temperature shunt

• EN 60920:1991/prA1:1991 IEC 920 Amendment 1; ballasts for tubular fluorescent lamps; introduction of informative annex E; explanation to ballast temperatures
• prEN ISO 21028-1 rev Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
• EN 1252-2:2001 Cryogenic Vessels - Materials - Part 2: Toughness Requirements for Temperatures between -80 degrees C and -20 Degrees C
• EN 12470-5:2003 Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum device)
• EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
• EN 2996-001:2006 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 001: Technical specification
• EN 3661-001:2006 Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 001: Technical specification
• EN 3774-001:2014 Aerospace series - Circuit breakers@ three-pole@ temperature compensated@ rated currents 1 A to 25 A - Part 001: Technical specification

Association of German Mechanical Engineers, temperature shunt

• DVS 2613-2004 Reflow soldering temperature profile optimization
• VDI/VDE 3512 Blatt 4-2009 Temperature measurements for building automation - Testing of temperature sensors
• VDI/VDE 3512 Blatt 2-2009 Temperature measurements for building automation - Temperatur sensors, temperature sensing elements and their measurements parameters
• VDI/VDE 3505 Blatt 1-1964 Steam generator control; control systems s for supporting gas currents and temperatures of sifting devices in coal mills

Group Standards of the People's Republic of China, temperature shunt

• T/ZEIIA 01-2019 Negative temperature coefficient thermal temperature sensor
• T/CASME 107-2022 Temperature sensor of ear thermometer
• T/DAWS 0004-2019 Cold chain logistics temperature and humidity control requirements and temperature measurement methods
• T/HZBX 013-2018 Cold chain logistics insulation container
• T/QGCML 1573-2023 Temperature and humidity collector
• T/HZBX 016-2018 Cold chain logistics temperature detection and requirements
• T/WHHLW 158-2024 Technical specifications for distributed fiber optic temperature detectors

Professional Standard - Construction Industry, temperature shunt

• JG/T 332-2011 Technical requirements of the heat allocation device by flow ratio and temperature of the water

American National Standards Institute （ANSI), temperature shunt

• ANSI/EIA 364-70A:1998 Test Procedure for Current vs Temperature Rise of Electrical Connectors

Defense Logistics Agency, temperature shunt

• DLA MS28131 REV G-1978 TRANSMITTER, PRESSURE, SYNCHRO, AIRCRAFT 320 DEGREE MOVEMENT, HIGH TEMPERATURE (177 DEG C) GENERAL PURPOSE
• DLA MS28131 REV G VALID NOTICE 2-2006 TRANSMITTER, PRESSURE, SYNCHRO, AIRCRAFT 320 DEGREE MOVEMENT, HIGH TEMPERATURE (177 DEG C) GENERAL PURPOSE
• DLA MS28131 REV G NOTICE 1-1999 TRANSMITTER, PRESSURE, SYNCHRO, AIRCRAFT 320 DEGREE MOVEMENT, HIGH TEMPERATURE (177 DEG C) GENERAL PURPOSE
• DLA MS27188-1962 PROBE, TOTAL TEMPERATURE, DEICEABLE
• DLA MS27188 VALID NOTICE 3-2005 PROBE, TOTAL TEMPERATURE, DEICEABLE
• DLA MS27188 NOTICE 2-1999 PROBE, TOTAL TEMPERATURE, DEICEABLE
• DLA MIL-T-49447 NOTICE 1-1999 TEMPERATURE SENSOR, RESISTANCE
• DLA MIL-T-49447-1988 TEMPERATURE SENSOR, RESISTANCE
• DLA MIL-T-49447 VALID NOTICE 2-2006 TEMPERATURE SENSOR, RESISTANCE
• DLA QPL-7990-16-2007 TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE, -70 DEG. TO +300 DEG. C

Japanese Industrial Standards Committee (JISC), temperature shunt

• JIS B 8413:1994 Temperature limiters and thermostats for hot water boilers
• JIS C 5402-5-2:2005 Connectors for electronic equipment -- Tests and measurements -- Part 5-2: Current-carrying capacity tests -- Test 5b: Current-temperature derating
• JIS B 8481:1980 Room thermostats

Professional Standard - Aviation Industry, temperature shunt

• Q/HBm 103-1993 Temperature Controller
• Q/HBm 104-1993 temperature overheating protector

British Standards Institution (BSI), temperature shunt

• BS EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
• BS EN 14597:2005 Temperature control devices and temperature limiters for heat generating systems
• BS QC 750109:1994 Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Rectifier diodes (including avalanche rectifier diodes), ambient and case-rated, for currents greater than 100 A
• BS EN 1252-2:2001 Cryogenic vessels - Materials - Toughness requirements for temperatures between -80 °C and -20 °C
• BS EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
• BS EN IEC 60751:2022 Industrial platinum resistance thermometers and platinum temperature sensors
• BS EN 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements - Current-carrying capacity tests - Test 5b - Current-temperature derating
• BS 1041-7:1988(1999) Temperature measurement — Part 7 : Guide to selection and use of temperature / time indicators
• BS 1041-7:1988 Temperature measurement - Guide to selection and use of temperature/time indicators
• BS 2782-7 Method 740C:1996 Methods of testing plastics. Rheological properties. Polymer dispersions. Determination of white point temperature and minimum film-forming temperature
• BS ISO 23208:2017 Cryogenic vessels. Cleanliness for cryogenic service
• BS EN 2591-209:1996 Elements of electrical and optical connection - Test methods - Current temperature derating
• BS EN ISO 21028-1:2016 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature. Temperatures below -80 C
• BS EN ISO 23208:2019+A1:2020 Cryogenic vessels. Cleanliness for cryogenic service
• BS ISO 6771:2007 Aerospace - Fluid systems and components - Pressure and temperature classifications
• BS EN 2495:1991(2000) Specification for Single - pole circuit breakers, temperature compensated, rated currents up to 25 A — Product standard
• BS EN 2592:1991(2000) Specification for Three - pole circuit breakers, temperature compensated, rated currents up to 25 A — Product standard
• BS EN 1252-1:1998 Cryogenic vessels. Materials. Toughness requirements for temperatures below -80C
• BS EN 60539-2:2004 Directly heated negative temperature coefficient thermistors - Sectional specification - Surface mount negative temperature coefficient thermistors
• BS EN 60539-2:2004+A1:2010 Directly heated negative temperature coefficient thermistors. Sectional specification. Surface mount negative temperature coefficient thermistors
• BS EN 2349-411:2007 Aerospace series — Requirements and test procedures for relays and contactors — Part 411: Temperature change
• 24/30457738 DC BS EN ISO 21028-1 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
• BS EN 61757-2-2:2017 Fibre optic sensors - Temperature measurement. Distributed sensing
• 19/30382658 DC BS EN IEC 60751. Industrial platinum resistance thermometers and platinum temperature sensors
• 19/30406424 DC BS EN IEC 60751. Industrial platinum resistance thermometers and platinum temperature sensors
• BS ISO 18549-2:2009 Metallic powders - Determination of apparent density and flow rate at elevated temperatures - Determination of flow rate at elevated temperatures
• BS EN IEC 61757-2-1:2021 Fibre optic sensors. Temperature measurement. Temperature sensors based on fibre Bragg gratings
• BS EN ISO 21028-2:2018 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature - Temperatures between -80 degrees C and -20 degrees C

Taiwan Provincial Standard of the People's Republic of China, temperature shunt

• CNS 9059-1982 Thermographs
• CNS 5791-1986 Temperature Indicators for Automobiles
• CNS 9831-1988 Surrounding Temperature Affect for Security Current of Wires Insulation

GSO, temperature shunt

• OS GSO ISO 18549-2:2016 Metallic powders -- Determination of apparent density and flow rate at elevated temperatures -- Part 2: Determination of flow rate at elevated temperatures
• GSO IEC 60751:2015 Industrial platinum resistance thermometers and platinum temperature sensors
• GSO ISO 18549-2:2016 Metallic powders -- Determination of apparent density and flow rate at elevated temperatures -- Part 2: Determination of flow rate at elevated temperatures
• BH GSO ISO 18549-2:2017 Metallic powders -- Determination of apparent density and flow rate at elevated temperatures -- Part 2: Determination of flow rate at elevated temperatures
• BH GSO IEC 60512-5-2:2016 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating
• GSO IEC 60512-5-2:2015 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating
• BH GSO IEC 60751:2016 Industrial platinum resistance thermometers and platinum temperature sensors
• GSO ISO 23208:2016 Cryogenic vessels -- Cleanliness for cryogenic service
• GSO ISO 6771:2016 Aerospace -- Fluid systems and components -- Pressure and temperature classifications
• OS GSO ISO 6771:2016 Aerospace -- Fluid systems and components -- Pressure and temperature classifications
• BH GSO IEC 61757-2-1:2023 Fibre optic sensors - Part 2-1: Temperature measurement - Temperature sensors based on fibre Bragg gratings
• BH GSO ISO 23208:2017 Cryogenic vessels -- Cleanliness for cryogenic service
• GSO ISO 18549-1:2016 Metallic powders -- Determination of apparent density and flow rate at elevated temperatures -- Part 1: Determination of apparent density at elevated temperatures
• OS GSO ISO 18549-1:2016 Metallic powders -- Determination of apparent density and flow rate at elevated temperatures -- Part 1: Determination of apparent density at elevated temperatures
• GSO IEC 61757-2-1:2023 Fibre optic sensors - Part 2-1: Temperature measurement - Temperature sensors based on fibre Bragg gratings
• BH GSO ISO 18549-1:2017 Metallic powders -- Determination of apparent density and flow rate at elevated temperatures -- Part 1: Determination of apparent density at elevated temperatures
• BH GSO ISO 21028-1:2017 Cryogenic vessels -- Toughness requirements for materials at cryogenic temperature -- Part 1: Temperatures below -80 degrees C
• OS GSO ISO 21028-1:2016 Cryogenic vessels -- Toughness requirements for materials at cryogenic temperature -- Part 1: Temperatures below -80 degrees C
• GSO ISO 21028-1:2016 Cryogenic vessels -- Toughness requirements for materials at cryogenic temperature -- Part 1: Temperatures below -80 degrees C
• GSO ISO 13765-2:2013 Refractory mortars -- Part 2: Determination of consistency using the reciprocating flow table method

國家市場監督管理總局、中國國家標準化管理委員會, temperature shunt

• GB/T 40380.2-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures
• GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures

Professional Standard - Electron, temperature shunt

• SJ/Z 9042-1987 Over-current and over-temperature protection device for radio and television equipment
• SJ 2142-1982 Methods of measurement for current temperature coefficient of silicon current regulator diodes
• SJ 3261-1989 Temperature fuses,Type RWH1

Underwriters Laboratories (UL), temperature shunt

• UL 1416-1999 UL Standard for Safety Overcurrent and Overtemperature Protectors for Radio- and Television-Type Appliances Sixth Edition; Reprint With Revisions Through and Including March 21, 2006
• UL 1416-2022 UL Standard for Safety Overcurrent and Overtemperature Protectors for Radio- and Television-Type Appliances
• UL 873-2015 Temperature-indicating and -regulating equipment
• UL 873-1994 Temperature-indicating and -regulating equipment

U.S. Air Force, temperature shunt

• AIR FORCE A-A-59419 A VALID NOTICE 1-2012 Calibrator, Thermometer
• AIR FORCE MIL-I-27247 C-1985 INDICATOR, TEMPERATURE, SYNCHRO
• AIR FORCE MIL-I-27667 C NOTICE 1-1997 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE
• AIR FORCE QPL-25446-2012 Transmitter, Temperature, Electrical Resistance
• AIR FORCE MIL-I-27667 C-1990 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE
• AIR FORCE QPL-25446-11-2010 TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE
• AIR FORCE MIL-I-27247 C VALID NOTICE 1-2008 Indicator, Temperature, Synchro
• AIR FORCE MIL-I-27247 C NOTICE 1-1997 INDICATOR, TEMPERATURE, SYNCHRO
• AIR FORCE QPL-25446-2011 Transmitter, Temperature, Electrical Resistance
• AIR FORCE MIL-I-27667 C VALID NOTICE 2-2008 Indicator, Temperature, Electrical Resistance
• AIR FORCE QPL-25446-11-1997 TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE
• AIR FORCE MS28038 REV A VALID NOTICE 2-2008 Transmitter, Temperature, Electrical Resistance
• AIR FORCE MS28038 REV A-1984 TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE
• AIR FORCE MIL-T-25446 D VALID NOTICE 2-2008 Transmitter, Temperature, Electrical Resistance
• AIR FORCE MIL-T-25446 D NOTICE 1-1997 TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE
• AIR FORCE MS28038 REV A NOTICE 1-1997 TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE
• AIR FORCE MIL-T-25446 D-1986 TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE

KR-KS, temperature shunt

• KS B 6156-2014(2024) Temperature limiters and thermostats for hot water boilers
• KS B ISO 23208-2018(2023) Cryogenic vessels — Cleanliness for cryogenic service
• KS B ISO 23208-2018 Cryogenic vessels — Cleanliness for cryogenic service
• KS B ISO 21028-2-2021 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature —Part 2: Temperatures between ?80 ℃ and ?20 ℃
• KS B ISO 21028-1-2017 Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
• KS C IEC 60749-11-2020 Semiconductor devices — Mechanical and climatic test methods —Part 11: Rapid change of temperature — Two-fluid-bath method

Association Francaise de Normalisation, temperature shunt

• NF C42-330*NF EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors.
• NF C93-400-5-2*NF EN 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements - Part 5-2 : current-carrying capacity tests - Test 5b : current-temperature derating.
• NF EN IEC 60751:2022 Platinum resistance thermometers and industrial platinum thermometric sensors
• NF C42-330*NF EN IEC 60751:2022 Industrial platinum resistance thermometers and platinum temperature sensors
• NF L72-415:1953 Aircraft temperature sensors.
• NF EN IEC 61757-2-1:2021 Fibronic sensors - Part 2-1: temperature measurement - Temperature sensors based on fiber Bragg gratings
• NF L58-100-411*NF EN 2349-411:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 411 : temperature change
• NF E86-509:1999 Cryogenic vessels. Cleanliness for cryogenic service.
• NF E86-509/A1:2006 Cryogenic vessels - Cleanliness for cryogenic service.
• NF C86-818/A1:1981 Rectifier diodes at specified ambient temperature
• NF C93-800-2-1*NF EN IEC 61757-2-1:2021 Fibre optic sensors - Part 2-1 : temperature measurement - Temperature sensors based on fibre Bragg gratings
• NF E18-100:2013 Time-temperature indicators and integrators - Tests and performance
• NF EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperatures - Part 1: temperatures below - 80 oC
• NF E86-506-1:1998 Cryogenic vessels. Materials. Part 1 : toughness requirements for temperatures below minus 80 degrees Celsius.
• NF C93-272-2/A1*NF EN 60539-2/A1:2011 Directly heated negative temperature coefficient thermistors - Part 2 : sectional specification - Surface mount negative temperature coefficient thermistors
• NF P52-702:2006 Temperature control devices and temperature limiters for heat generating systems.
• NF C93-272-2*NF EN 60539-2:2005 Directly heated negative temperature coefficient thermistors - Part 2 : sectional specification - Surface mount negative temperature coefficient thermistors
• NF P52-702*NF EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
• NF EN ISO 23208:2019 Récipients cryogéniques - Propreté en service cryogénique
• NF E86-506-1*NF EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1 : temperatures below - 80 oC
• NF L58-630-001*NF EN 3662-001:2007 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 001 : technical specification
• NF L58-620-001*NF EN 3661-001:2007 Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 001 : technical specification

CENELEC - European Committee for Electrotechnical Standardization, temperature shunt

• EN 60751:1995 Industrial Platinum Resistance Thermometer Sensors (Incorporates Amendment A2: 1995)

International Electrotechnical Commission (IEC), temperature shunt

• IEC 60751:2022 Industrial platinum resistance thermometers and platinum temperature sensors
• IEC 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests; Test 5b: Current-temperature derating
• IEC 60751:2008 Industrial platinium resistance thermometer and platinum temperature sensors
• IEC 61757-2-1:2021 Fibre optic sensors - Part 2-1: Temperature measurement - Temperature sensors based on fibre Bragg gratings
• IEC 60539-2:2010 Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors
• IEC 60539-2:2003 Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification; Surface mount negative temperature coefficient thermistors
• IEC 60539-2:2003+AMD1:2010 CSV Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors
• IEC 60539-2:2019 RLV Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors

Standard Association of Australia （SAA）, temperature shunt

• AS 1308:1987 Electric water heaters - Thermostats and thermal cutouts
• AS 2374.2:1997 Power transformers - Temperature rise

AENOR, temperature shunt

• UNE-EN 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements -- Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating.
• UNE-EN 12300:1999 CRYOGENIC VESSELS. CLEANLINESS FOR CRYOGENIC SERVICE.
• UNE-EN 12300:1999/A1:2006 Cryogenic vessels - Cleanliness for cryogenic service
• UNE-EN 14597:2014 Temperature control devices and temperature limiters for heat generating systems
• UNE 28579:1986 AEROSPACE CONSTRUCTION. FLUID SYSTEMS AND COMPONENTS. PRESSURE AND TEMPERATURE CLASSIFICATIONS.
• UNE-ISO 8310:2005 Refrigerated light hydrocarbon fluids -- Measurement of temperature in tanks containing liquefied gases -- Resistance thermometers and thermocouples
• UNE-EN 60749-11:2003 Semiconductor devices - Mechanical and climatic test methods -- Part 11: Rapid change of temperature - Two-fluid-bath method.

ES-UNE, temperature shunt

• UNE-EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors (Endorsed by AENOR in February of 2009.)
• UNE-EN IEC 60751:2022 Industrial platinum resistance thermometers and platinum temperature sensors (Endorsed by Asociación Espa?ola de Normalización in April of 2022.)
• UNE-EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)
• UNE-EN IEC 61757-2-1:2021 Fibre Optic Sensors - Part 2-1: Temperature measurement - Temperature sensors based on fibre Bragg gratings (Endorsed by Asociación Espa?ola de Normalización in November of 2021.)
• UNE-EN ISO 23208:2020 Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017)

European Committee for Electrotechnical Standardization（CENELEC）, temperature shunt

• EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
• EN IEC 60751:2022 Industrial platinum resistance thermometers and platinum temperature sensors

Danish Standards Foundation, temperature shunt

• DS/EN 60512-5-2:2002 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating
• DS/EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
• DS/EN 12300:1999 Cryogenic vessels - Cleanliness for cryogenic service
• DS/EN 12300/A1:2006 Cryogenic vessels - Cleanliness for cryogenic service
• DS/EN IEC 61757-2-1:2021 Fibre optic sensors – Part 2-1: Temperature measurement – Temperature sensors based on fibre Bragg gratings
• DS/EN 60749-11:2003 Semiconductor devices - Mechanical and climatic test methods - Part 11: Rapid change of temperature - Two-fluid-bath method
• DS/EN 2995-001:2006 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A – Part 001: Technical specification
• DS/EN 60749-11/Corr.1:2003 Semiconductor devices - Mechanical and climatic test methods - Part 11: Rapid change of temperature - Two-fluid-bath method
• DS/EN 3661-001:2006 Aerospace series – Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A – Part 001: Technical specification
• DS/EN 2996-001:2006 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A – Part 001: Technical specification
• DS/EN 3662-001:2006 Aerospace series – Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A – Part 001: Technical specification
• DS/EN 60749-11/Corr.2:2004 Semiconductor devices - Mechanical and climatic test methods - Part 11: Rapid change of temperature - Two-fluid-bath method
• DS/EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
• DS/EN 1252-1:1998 Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below -80°C

TR-TSE, temperature shunt

• TS 2736-1977 High Temperature Water Central Heating Systems With Flow Temperatures Higher Than 110°C

German Institute for Standardization, temperature shunt

• DIN EN 60751:2009 Industrial platinum resistance thermometers and platinum temperature sensors (IEC 60751:2008); German version EN 60751:2008
• DIN 58660:1966 Meteorological instruments - Thermometer 370 for psychrometer
• DIN 58661:1966 Meteorological instruments - Thermometer 280 for psychrometer
• DIN EN 2349-411:2008 Aerospace series - Requirements and test procedures for relays and contactors - Part 411: Temperature change; German and English version EN 2349-411:2007
• DIN 43767:1986-03 Measurement and control; electrical temperature sensors; welded-stem thermometers / Note: To be replaced by DIN 43735-3 (2005-04).
• DIN EN 14597:2015-02 Temperature control devices and temperature limiters for heat generating systems; German version EN 14597:2012
• DIN EN ISO 23208:2020-11 Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017 + Amd 1:2020); German version EN ISO 23208:2019 + A1:2020
• DIN EN 1252-1:1998 Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below - 80°C; German version EN 1252-1:1998
• DIN 43767:1986 Measurement and control; electrical temperature sensors; welded-stem thermometers
• DIN EN IEC 60751:2023-06 Industrial platinum resistance thermometers and platinum temperature sensors (IEC 60751:2022); German version EN IEC 60751:2022 / Note: DIN EN 60751 (2009-05) remains valid alongside this standard until 2025-03-03.
• DIN 43771:1989-12 Measurement and control; electrical temperature sensors; fast response thermometers / Note: To be replaced by DIN 43735-3 (2005-04).
• DIN EN 2996-001:2008 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 001: Technical specification; German and English version EN 2996-001:2006
• DIN EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)
• DIN EN 60512-5-2:2003-01 Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests; Test 5b: Current-temperature derating (IEC 60512-5-2:2002); German version EN 60512-5-2:2002 / Note: DIN IEC 60512-3 (1994-05) remains valid along...
• DIN 58654:1960 Meteorological devices - Maximum thermometer
• DIN 58653:1960 Meteorological devices - Minimum thermometer
• DIN EN 3662-001:2008 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 001: Technical specification; German and English version EN 3662-001:2006

未注明發布機構, temperature shunt

• DIN EN 12300:1999 Cryo container – purity for cryogenic operation DIN
• DIN EN ISO 21028-2 E:2015-02 Toughness requirements for cryogenic vessel materials at low temperatures Part 2: Temperatures between -80 degrees Celsius and -20 degrees Celsius (draft)
• DIN EN ISO 21028-2 E:2016-06 Toughness requirements for cryogenic vessel materials at low temperatures Part 2: Temperatures between -80 degrees Celsius and -20 degrees Celsius (draft)
• DIN EN 60539-2 E:2018-01 Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors
• DIN EN ISO 23208 E:2018-10 Cleanliness of Cryogenic Vessels for Cryogenic Services (Draft)

Electronic Components, Assemblies and Materials Association, temperature shunt

• ECA 364-70A-1998 TP-70A Temperature Rise Versus Current Test Procedure for Electrical Connectors and Sockets

United States Navy, temperature shunt

• NAVY QPL-3155-16-2002 VALVE, TEMPERATURE REGULATING VENTILATION HEATER, STEAM CONTROL, NAVAL SHIPBOARD USE
• NAVY MIL-T-2118 C-1990 TRAP, STEAM, ANGLE, THERMOSTATIC

Professional Standard - Nuclear Industry, temperature shunt

• EJ/T 1105-1999 Determination of temperature for fluid inclussion in minerals

National Sanitation Foundation (NSF), temperature shunt

• NSF P235-2003 Temperature Mimicking Sensors

VDI - Verein Deutscher Ingenieure, temperature shunt

• VDI/VDE 3512 BLATT 4-2014 Temperaturmessung fuer die Gebaeudeautomation - Pruefung von Temperaturfuehlern
• VDI/VDE 3512 Blatt 4-2007 Temperaturmessung fuer die Gebaeudeautomation - Pruefung von Temperaturfuehlern
• VDI/VDE 3512 Blatt 3-2007 Temperature measurements for building automation - Installation of temperature sensors
• VDI/VDE 3512 BLATT 2-2014 Temperature measurement for building automation - Temperature sensors@ temperature sensing elements and their measurement parameters

RO-ASRO, temperature shunt

• STAS 2764-1986 STEAM, HOT AND WARM WATER BOILERS Nominal flows, pressures and tem- peratures
• STAS 8703-1970 TEMPERATURE MEASURING INSTRUMENTS Terminology
• STAS 1703/2-1980 Power transformers TEMPERATURE RISE

European Association of Aerospace Industries, temperature shunt

• AECMA PREN 2794-001-1994 Aerospace Series Circuit Breakers, Single-Pole, Temperature Compensated, Rated Currents 20 A to 50 A Part 001 : Technical Specification Edition P 1
• AECMA PREN 2665-001-1994 Aerospace Series Circuit Breakers, Three-Pole, Temperature Compensated, Rated Currents 20 A to 50 A Part 001 : Technical Specification Edition P 1
• AECMA PREN 3661-001-2005 Aerospace Series Circuit Breakers, Single-Pole, Temperature Compensated, Rated Current 20 A to 50 A Part 001: Technical Specification Edition P 3

International Organization for Standardization (ISO), temperature shunt

• ISO 6771:2007 Aerospace - Fluid systems and components - Pressure and temperature classifications
• ISO 18549-2:2009 Metallic powders - Determination of apparent density and flow rate at elevated temperatures - Part 2: Determination of flow rate at elevated temperatures
• ISO 21028-2:2004 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between - 80 °C and - 20 °C
• ISO/CD 21028-1:2011 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees C
• ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C
• ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 degrees C
• ISO 21028-1:2004 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C
• ISO 6771:1981 Aerospace construction — Fluid systems and components — Pressure and temperature classifications

SAE - SAE International, temperature shunt

• SAE MA2001B-1993 Aerospace Fluid Systems and Components - Pressure and Temperature Classifications
• SAE AS2001-1998 Aerospace Fluid Systems and Components - Pressure and Temperature Classifications

PL-PKN, temperature shunt

• PN L01460-1992 Aerospace. Fluid systems and components. Pressure and temperature classifications

Lithuanian Standards Office , temperature shunt

• LST EN 12300-2000 Cryogenic vessels - Cleanliness for cryogenic service
• LST EN 12300-2000/A1-2006 Cryogenic vessels - Cleanliness for cryogenic service
• LST EN 14597-2012 Temperature control devices and temperature limiters for heat generating systems
• LST EN 60751-2008 Industrial platinum resistance thermometers and platinum temperature sensors (IEC 60751:2008)
• LST EN 60512-5-2-2003 Connectors for electronic equipment. Tests and measurements. Part 5-2: Current-carrying capacity tests. Test 5b: Current-temperature derating (IEC 60512-5-2:2002)

Professional Standard - Machinery, temperature shunt

• JB/T 9478.7-2013 Photovoltaic cell measurement methods - Part 7: Dark current temperature characteristics
• JB/T 12599-2016 Integrative temperature transducer
• JB/T 9478.7-1999 Measuring methods of photocell - Dark current temperature characteristic
• JB/T 7486-2008 Spectrum for types of temperature sensor series
• JB/T 7631-1994 Resistance Thermometer for Transformer

Tianjin Provincial Standard of the People's Republic of China, temperature shunt

• DB12/T 560-2015 Cold chain logistics temperature detection and requirements specification
• DB12/T 3012-2018 Cold chain logistics temperature and humidity requirements and measurement methods
• DB12/T 559-2019 Technical requirements for cold chain logistics insulation containers
• DB12/T 559-2015 Technical requirements for cold chain logistics insulation containers

Professional Standard - Electricity, temperature shunt

• DL/T 1446-2015 Measurement of ignition temperature of pulverized coal-air flow

American Society of Mechanical Engineers (ASME), temperature shunt

• ASME PTC 19.3-1974 Part 3: Temperature Measurement Instruments and Apparatus

YU-JUS, temperature shunt

• JUS N.H1.042-1989 Power transformers. Thernometer pocket

CEN - European Committee for Standardization, temperature shunt

• EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C

Professional Standard - Automobile, temperature shunt

• QC/T 208-2007 Temperature alarms for automobile
• QC/T 208-1996 Automotive temperature alarm

國家能源局, temperature shunt

• NB/T 10443-2020 NTC thin film temperature sensor
• NB/T 10093-2018 Capillary tubes for pressure thermostats and thermometers

Hebei Provincial Standard of the People's Republic of China, temperature shunt

• DB13/T 3012-2018 Cold chain logistics temperature and humidity requirements and measurement methods

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., temperature shunt

• ASHRAE QC-06-008-2006 Transient Temperature Measurements and Characteristics for Temperature Sensors and Energy Wheels

Beijing Provincial Standard of the People's Republic of China, temperature shunt

• DB11/T 3012-2018 Cold chain logistics temperature and humidity requirements and measurement methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, temperature shunt

• GB/T 24959-2010 Refrigerated light hydrocarbon fluids.Measurement of temperature in tanks containing liquefied gases.Resistance thermometers and thermocouples

National Metrological Technical Specifications of the People's Republic of China, temperature shunt

• JJF 1183-2007 Calibration Specification of the Temperature Transmitter

Professional Standard - Aerospace, temperature shunt

• QJ 2278-1992 Temperature Sensor Series Spectrum

Professional Standard-Ships, temperature shunt

• CB 3456-1992 boat thermostat
• CB/T 3389-1992 electronic thermostat

AT-OVE/ON, temperature shunt

• OVE EN IEC 61757-2-1:2021 Fibre Optic Sensors - Part 2-1: Temperature measurement - Temperature sensors based on fibre Bragg gratings (IEC 86C/1702/CDV)

Others:   automatic diverter, shunt, Splitter temperature, Shunt Temperature Standard, Splitter Dynamics, Based on shunt technology, Shunt Calibration, vertical splitter, Splitter temperature, small shunt, Splitter Dynamics, copper pipe shunt, Shunt Verification, temperature shunt, Splitter flange, Spore splitter, critical shunt, temperature at shunt, liquid diverter, DC shunt.