Electrical and electronic product environment

Electrical and electronic product environment, Total:95 items.

In the international standard classification, Electrical and electronic product environment involves: Environmental testing, Test conditions and procedures in general, Electrical engineering in general, Shipbuilding and marine structures in general, Electrical and electronic testing, Linear and angular measurements.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Electrical and electronic product environment

• GB/T 2422-1995 Environmental testing for electric and electronic products. Terms and definitions
• GB/T 2421.1-2008 Environmental testing for electric and electronic products.General and guidance
• GB/T 2424.2-2005 Environment tests for electric and electronic products.Guidance for damp heat tests
• GB/T 28179-2011 Environmentally conscious design for electrical and electronic product.Indentification of environmental aspects
• GB/T 26671-2011 Guide for environmentally conscious design assessment of electrical and electronic products
• GB/T 26669-2011 Environmentally conscious design for electrical and electronic products.Glossary
• GB/T 5170.1-2008 Inspection methods for environmental testing equipments for electric and electronic products.Genernal
• GB/T 11804-2005 Environmental condition for electric and electronic products-Terminologies
• GB/T 2421-1999 Environmental testing for electric and electronic products Part 1: General and guidance
• GB/T 2424.5-2006 Enviromental tests for electric and electronic products.Confirmation of the performance of temperature chambers
• GB/T 2424.19-2005 Environment tests for electric and electronic products-Guidance on the application of the environmental test to simulate the effects of storage
• GB/T 10593.2-1990 Method of the measuring enviromental parameters for electric and electronic products salt mist
• GB/T 2424.15-2008 Enviromental testing for electric and electronic products.Guide for combined temperature/low air pressure tests
• GB/T 5170.8-2008 Inspection methods for environmental testing equipments for electric and electronic products.Salt mist testing equipments
• GB/T 5170.5-2008 Inspection methods for environmental testing equipments for electric and electronic products.Damp heat testing equipments
• GB/T 5170.2-2008 Inspection methods for environmental testing equipments for electric and electronic products.Temperature testing equipments
• GB/T 2424.6-2006 Environmental testing for electric and electronic products.Confirmation of the performance of temperature/humidity chambers
• GB/T 2423.2-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
• GB/T 2423.1-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
• GB/T 2423.21-2008 Environmental testing for electric and electronic products.Part 2 Test methods Test M:Low air pressure
• GB/T 5170.9-2008 Inspection methods for environmental testing equipments for electric and electronic products.Solar radiation testing equipments
• GB/T 2423.23-1995 Environmental testing for electric and electronic proucts. Test Q: Sealing
• GB/T 5170.11-2008 Inspection methods for environmental testing equipments for electric and electronic products.Corrosive gas testing equipments
• GB/T 2423.28-2005 Environmental testing for electric and electronic products.Part2:Test methods-Test T:Soldering
• GB/T 2423.22-2002 Environmental testing for electric and electronic products--Part 2: Test methods Test N: Change of temperature
• GB/T 10593.2-2023 Measurement methods for environmental parameters of electrical and electronic products Part 2: Salt spray
• GB/T 13951-1992 General rule of environmental tests of electric and electronic products for mobile platforms and offshore installations
• GB/T 2423.101-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test: Inclinations and swings
• GB/T 5170.20-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Water testing equipments
• GB/T 2423.17-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist
• GB/T 2423.16-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test J and guidance:Mould growth
• GB/T 2423.3-2006 Environmental testing for electric and electronic products-Part 2:Tesing method-Test Cab：Damp heat,steady state
• GB/T 5170.2-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Temperature testing equipments
• GB 10593.3-1990 Vibration data processing and induction of environmental parameter measurement methods for electrical and electronic products
• GB/T 2423.8-1995 Environmental testing for electric and electronic products. Parts 2: Test methods. Test Ed: Free fall
• GB/T 2424.13-2002 Environmental testing for electric and electronic products--Part 2: Test methods Guidance on change of temperature tests
• GB/T 2423.42-1995 Basic environmental testing procedures for electric and electronic products. Combined low temperature/low air pressure/vibration(sinusoidal)test
• GB/T 4796-2001 Classification of environmental parameters and their severities of electric and electronic products
• GB/T 5170.5-1996 Inspection on methods for basic parameters of environmental testing equipments for electric and electronic products--Damp heat testing equipments
• GB/T 11804-1989 Terms of environmental conditions for electric and electronic products
• GB/T 2423.45-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Z/ABDM: Climatic sequence
• GB/T 2424.17-1995 Environmental testing for electric and electronic prodcts. Guidance on soldering test
• GB/T 2424.7-2006 Environmental tests for electric and electronic products. Measurements in temperature chambers for tests A and tests B (with load)
• GB/T 5170.8-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Salt mist testing equipments
• GB/T 10593.1-2005 Measuring methods of environmental parameters for electric and electronic products.Part 1:Vibration
• GB/T 2423.55-2006 Environmental testing for electric and electronic products.Part 2:Test methods.Test Eh:Hammer tests
• GB/T 4797.5-2008 Classification of environmental conditions of electric and electronic products.Environmental conditions of nature.Precipitation and wind
• GB/T 2423.54-2005 Environmental testing for electric and electronic products-Part 2:Test Methods-Test Xc:Fluid contamination
• GB/T 2424.26-2008 Environmental testing for electric and electronic products.Part 3:Supporting documentation and guidance.Selecting amongst vibration tests
• GB/T 2423.1-2001 Environmental testing for electric and electronic products Part 2: Test methods Tests A: Cold
• GB/T 2423.6-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eb and guidance: Bump
• GB/T 5170.9-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Solar radiation testing equipments
• GB/T 2424.25-2000 Environmental testing for electric and electronic products-Part 3:Test guidance Seismic test methods
• GB/T 2423.37-2006 Environmental testing for electric and electronic products Part 2: Test methods Test L: Dust and sand
• GB/T 5170.11-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Corrosive gas testing equipments
• GB/T 2423.39-2008 Environmental test for electric and electronic products.Part 2:Test methods.Test Ee:Bounce
• GB/T 2423.10-2008 Environmental testing for electric and electronic products.Part 2:Tests methods Test Fc:Vibration(sinusoidal)
• GB/T 2423.33-2005 Environmental testing for electric and electronic products Part 2:Test Method Test Kca:High concentration sulfur dioxide
• GB/T 2423.15-2008 Environmental testing for electric and electronic products.Part 2:Tests methods.Test Ga and guidance:Acceleration,steady
• GB/T 2423.52-2003 Environmental testing for electric and electronic products-Part 2:Test methods-Test 77:Body strength and impact shock
• GB/T 2423.44-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eg:Impact, spring hammer
• GB/T 2423.48-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Ff:Vibration.Time-history method
• GB/T 2424.17-2008 Environmental testing for electric and electronic products.Part 2:Test methods Guidance on test T:Soldering test
• GB/T 5170.10-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Combined high and low temperature/low air pressure testing equipment
• GB/T 2423.18-2000 Environmental testing-Part 2: Tests-Test Kb:Salt mist,cyclic(sodium chloride solution)
• GB/T 5170.14-2009 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products.Electrodynamic vibrating type machines for vibration(sinusoidal)test
• GB/T 26669-2024 Terminology for Environmental Awareness Design of Electrical and Electronic Products
• GB/T 2424.14-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Guidance for solar radiation testing
• GB/T 2423.32-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Ta:Solderability test by the wetting balance method
• GB/T 5170.21-2008 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products.Hydraulic vibrating type machines for vibration(random) test
• GB/T 5170.16-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Centrifugal machines for constant acceleration test
• GB/T 5170.1-1995 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. General
• GB/T 2424.24-1995 Basic environmental testing procedures for electric and electronic products. Guidance for combined temperature (cold and heat)/low air pressure/vibration(sinusoidal)test
• GB/T 5170.18-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Composite temperature/humidity cyclic testing equipments
• GB/T 2423.25-2008 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests
• GB/T 2423.34-2005 Environmental testing for electric and electronic products.Part 2:Test Methods Test Z/AD:Composite temperature/humidity cyclic test
• GB/T 2423.26-2008 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests
• GB/T 2423.2-2001 Environmental testing for electric and electronic products Part 2: Test methods Tests B: Dry heat
• GB/T 5170.19-2005 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products Combined temperature/vibration(sinusoidal)testing equipments
• GB/T 2423.47-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fg: Vibration, acoustically induced
• GB/T 2423.49-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fe:Vibration--sine-beat method
• GB/T 10593.2-2012 Method of the measuring environmental parameters for electric and electronic products.Part 2:Salt mist
• GB/T 5170.19-1989 Inspection methods for basic parameters of environmen-tal testing equipments for electric and electronic products--Combined temperature/vibration (sinusoidal)testing equipments
• GB/T 2423.15-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Ga and guidance: Acceleration, steady state
• GB/T 2423.5-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Ea and guidance: Shock
• GB/T 2423.57-2008 Environmental testing for electric and electronic products.Part 2: Tests.Test Ei: Shock.Shock response spectrum synthesis
• GB/T 2423.10-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fc and guidance: Vibration (Sinusoidal)
• GB/T 2423.24-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Sa: Simulated solar radiation at ground level
• GB/T 10593.1-1989 Method of measuring of environmental parameters for electric and electronic products--Vibration
• GB/T 2423.27-2020 Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests
• GB/T 2423.16-1999 Environmental testing for electric and electronic products-- Part 2: Tests--Test J and guidance: Mould growth
• GB/T 2423.9-2001 Environmental testing for electric and electronic products Part 2: Test methods Test Cb: Damp heat,steady state,primarily for equipment
• GB/T 4797.7-2008 Classification of environmental conditions of electric and electronic products.Environmental conditions appearing in nature.Earthquake vibration and shock

Korean Agency for Technology and Standards (KATS), Electrical and electronic product environment

• KS C 0285-1997 Environmental testing Part 2 test methods Test Z/ABDM : Climatic sequence
• KS C 0277-1997 Background information, Section 0ne -Cold and dry heat tests

Others:   Environmental Tests for Electric and Electronic Products Part 5, Environmental test equipment for electrical and electronic products, Environmental test temperature for electrical and electronic products, Inspection methods for environmental test equipment for electrical and electronic products, Environmental test low temperature for electrical and electronic products, Environmental testing of electrical and electronic products, Environmental test temperature for electrical and electronic products, Environmental supervision of hydropower projects, Environmental test regulations for electrical and electronic products, Electrical and electronic product environment, Test methods for environmental testing of electrical and electronic products, Fire Hazard Test for Electrical and Electronic Products, Environmental Testing for Electrical and Electronic Products Part 2, Electrical and electronic products, Plateau electrical and electronic products, Electrical and electronic products (environmental test), Electrical and electronic products for coal mine communication, detection and control, Basic environmental test regulations for electrical and electronic products, Electrical and electronic products and military equipment, Natural environmental conditions for electrical and electronic products.