ASTM F90-24
用于手術植入物應用的鍛造鈷-20Chromium-15鎢-10鎳合金的標準規格（UNS R30605）
Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
- 標準號
- ASTM F90-24 中文首頁
- 發布
- 2024年
- 總頁數
- 5頁
- 發布單位
- 美國材料與試驗協會
- 當前最新
- ASTM F90-24
- 適用范圍
- 1. Scope - This specification covers the chemical, mechanical, and metallurgical requirements for wrought cobalt-20chromium-15tungsten-10nickel alloy used for surgical implants. The properties specified apply specifically to wrought bar, rod, wire, sheet, and strip, but do not apply to surgical fixation wire (see Specification F1091). 1.2 - The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.3 - Any agreement between purchaser and supplier must meet the minimum requirements of this specification. 1.4 - This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 - This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
其他標準
ASTM F67-00 外科植入用非合金鈦(UNS R50250、UNS R50400、UNS R50550、UNS R50700)標準規范
ISO/ASTM 52921:2013 添加劑制造中所用標準術語.坐標系統和測試方法
ASTM F3001-14 帶有粉末層融合的疊層制造鈦-6 鋁-4 釩超低間隙 (ELI) 的標準規范
ISO 10993-1:2018 醫療器械的生物學評價. 第1部分: 在風險管理過程內的評價與試驗
ASTM F136-13(2021)e1 薄膜設備用鉻濺射極的標準規范
DS/ISO 13179-1:2021 外科植入物“金屬外科植入物上的涂層”第1部分：鈦或鈦-6 鋁-4 釩合金粉末的等離子噴涂涂層
ASTM F67-24 未合金鈦標準規范 用于外科植入應用（UNS R50250 UNS R50400 UNS R50550 UNS R50700）
ASTM F138-19 鍛造18號鉻14鎳 - 2.5鉬不銹鋼棒和外科植入物線的標準規范（UNS S31673）
ASTM F746-04(2021) 金屬外科植入材料的點蝕或縫隙腐蝕的標準試驗方法
DB12/T 888.6-2019 建設項目生態環境影響論證報告編寫技術規范
ASTM F1800-19e1 整體膝關節替代物的醫療脛骨盤成分的周期疲勞試驗的標準試驗方法
ASTM F67-13(2017) 用于手術植入物應用的非合金鈦的標準規格（UNS R50250 UNS R50400 UNS R50550 UNS R50700）
ASTM F1877-24 顆粒表征的標準實踐
GB/T 41507-2022 增材制造 術語 坐標系和測試方法
ISO 13779-2:2018 外科植入物.羥基磷灰石.第2部分:羥基磷灰石熱噴涂涂層
ASTM F2083-21 膝關節置換假體的標準規范
ISO 22622:2019 手術植入物 - 全踝關節假體的磨損 - 帶負載或排量控制的磨損試驗機的加載和位移參數以及相應的測試環境條件
GB/T 16886.1-2022 醫療器械生物學評價 第1部分：風險管理過程中的評價與試驗
GB/T 35352-2017 增材制造 文件格式